SportsTurf

April 2013

SportsTurf provides current, practical and technical content on issues relevant to sports turf managers, including facilities managers. Most readers are athletic field managers from the professional level through parks and recreation, universities.

Issue link: https://read.dmtmag.com/i/120370

Contents of this Issue

Navigation

Page 28 of 48

fully function. The pitching mound is clay. The turf is a 2 ½" pile height. Infill is 1¾" deep totaling 9 pounds of sand and rubber per square foot. Crushed cinder rock, 1/8" minus, was installed at the warning track to create a tactile change from the field infill. Seams are sewn using the manufacturer's recommended methods. The perimeter of the synthetic turf is attached to a concrete header and composite lumber nailer board. The synthetic turf profile includes a minimum of 6" open-graded base rock at the field perimeter and gradually gets thicker toward the field centerline/collector pipe." The warning track was made of 20' wide FieldTurf in a rust color with a thin top dressing of cinders to provide a tactile distinction from the baseball field. The infield skinned areas are FieldTurf Mini Pitch, 2½" pile height with 1-¾" on brown-colored sand/rubber infill. Even the aesthetics of the synthetic turf were carefully planned, noted Olsen. "The alternating striped pattern of dark green and light green colors was chosen for www.stma.org SportsTurf 29

Articles in this issue

Links on this page

Archives of this issue

view archives of SportsTurf - April 2013