www.specialized.net • 800-866-5353
The Safety Tool Specialists
Rubber Insulating High Voltage Glove Kits
Use Cementex
®
certified rubber-insulating safety gloves in potentially danger-
ous electrical work environments. Recommended for Class 0 low voltage up to
1000 V max. and marked with ANSI/ASTM number, type, class and size. Speci-
fications are 5000 max test ac V, 20,000 max test dc V, 1000 max use ac V and
1500 max use dc V per IEC 903. Each 11.2-ounce kit includes a pair of rubber
gloves and leather protectors in a rugged canvas pouch. Use protectors only with
rubber-insulating gloves. Liners worn under gloves available separately.
Insulating Dielectric
Rubber Blankets
Blankets measure 3' x 3' and are
available separately or in kits. The yellow
BL-C0 is a Class 0 (Type II) low-voltage insulating
blanket that weighs 2.2 pounds. The BLK-C0 kit includes the blanket and two
clamp pins in a yellow plastic storage canister and weighs 7.6 pounds. The black
BL-C2 is a Class 2 (Type I) high-voltage insulating blanket with six eyelets and
weighs 7.1 pounds. The BLK-C2 kit includes the blanket and two clamp pins in a
yellow plastic storage canister and weighs 12.2 pounds. The 4.9-pound canister
measures 8" x 8" x 37.5".
Use the BL-CLP camp pin set to secure blanket to work surface. Also clamp
blanket sides together when wrapped around transmission lines to prevent falling
or blowing off workspace which could cause electrocution. Insulating blankets are
dielectrically tested at the time of sale. In accordance with OSHA standards, they
must be retested every 12 months. This service is available from Cementex.
278X146 BLK-C0 (Class 0 1000-V Yellow Blanket Kit) $209.72 ea.
278X139 BL-C0 (Class 0 1000-V Yellow Blanket Only) $90.16 ea.
278X128 BLK-C2 (Class 2 20-kV Black Blanket Kit) $215.60 ea.
278X140 BL-C2 (Class 2 20-kV Black Blanket Only) $95.06 ea.
278X141 BL-CLP (Blanket Kit Clamp Pins, Set of Two) $21.56 ea.
Other blankets available upon request.
Insulating
Shielding
Material
Electrical insulating
material is designed to
protect personnel, equipment and work
areas from electrical hazards. ASTM D178-
88 Type 2 rolls are flame, oil, ozone and
puncture resistant. Factory-tested rubber is
flexible to -60ºF and won't melt. Use ESY-1
Class O (type 2) material for 1000 V ac max
and ESO-7.5 Class 1 (type 2) for 7500 V ac
max. PVC material is 0.04" thick and is Class
1 (type 2) rated.
Kits include shielding material, a pair of clamps
and a carry/storage bag. Choose from 25-pound
ESY-1, 36.4-pound ESO-7.5 and 23-pound PVC7.5
rolls. The 4.9-pound carrying/storage bag has Velcro
®
closure strips and handles.
278X818 ESY-1K (1-kV 3' x 30' Yellow Roll Kit) $574.27 ea.
278X200 ESY-1 (1-kV 3' x 30' Yellow Roll Only) $559.57 ea.
278X819 ESO-7.5K (7.5-kV 3' x 30' Orange/Yellow Roll Kit) $988.80 ea.
278X909 ESO-7.5 (7.5-kV 3' x 30' Orange/Yellow Roll Only) $940.78 ea.
278X943 PVC-7.5K (7.5-kV 3' x 30' Clear PVC Roll Kit) $751.65 ea.
278X944 PVC-7.5 (7.5-kV 3' x 30' Clear PVC Roll Only) $680.11 ea.
Arc Flash Accessories
The AFS-180 face shield and hard hat is
PPE Level 2 12+ cal arc rated. Face shield
features a scratch resistant outer coating,
anti-fog coating, and gray tint for undistorted
clear vision of true colors. The Cat Level 2
rate balaclava is made from flame resistant
single layer cotton knit. Protect and store
the AFS-180 face shield and hard hat in the
nylon drawstring storage bag or canister.
278X126 AFS-180 Arc Flash Face Shield and Hard Hat $175.42 ea.
278X972 CSH-FRK FR Balaclava Sock Hood, 12 Cal/cm
2
$31.36 ea.
278X127 AFS-SB Arc Flash Storage Bag for AFS-180 $24.50 ea.
278X702 ST-AFSC Arc Flash Storage Canister for AFS-180 $45.08 ea.
278X298 IGK0-11-8 High Voltage Glove Kit, Size 8 $102.90 ea.
278X303 IGK0-11-8.5 High Voltage Glove Kit, Size 8.5 $102.90 ea.
278X308 IGKO-11-8.5-BLK Black High Voltage Glove Kit, Size 8.5 $69.58 ea.
278X299 IGK0-11-9 High Voltage Glove Kit, Size 9 $102.90 ea.
278X305 IGK0-11-9.5 High Voltage Glove Kit, Size 9.5 $102.90 ea.
278X311 IGKO-11-9.5-BLK Black High Voltage Glove Kit, Size 9.5 $69.58 ea.
278X300 IGK0-11-10 High Voltage Glove Kit, Size 10 $102.90 ea.
278X309 IGK0-11-10.5 High Voltage Glove Kit, Size 10.5 $102.90 ea.
278X313 IGKO-11-10.5-BLK Black High Voltage Glove Kit, Size 10.5 $69.58 ea.
278X301 IGK0-11-11 High Voltage Glove Kit, Size 11 $102.90 ea.
278X302 IGK0-11-12 High Voltage Glove Kit, Size 12 $102.90 ea.
278X166 COTGLV10 Cotton Glove Liners, Size 10 $4.90 ea.
PROPER SIZING FOR INSULATING RUBBER GLOVES
Measure the circumference of the palm,
as shown, and add 1" to the measurement
to determine the glove size needed.
For example, a measurement of 9"
plus the 1" would be 10" and would
require a size 10 glove.
Glove Sizes Available: 8, 9, 10, 11 and 12
Please contact Specialized Products if you
have questions or would like to check stock.
www.specialized.net (800) 866-5353
UltraLite
Arc Flash Kits
The Cementex UltraLite Series is
the lightest and most comfortable
Arc Flash PPE Category 2 Task Wear
available. It meets current ASTM
F1506 standards as well as ASTM
F1959/F1959M-99. These kits offer
light and comfortable 11 and 12 cal/
cm
2
gray task wear. The color allows
for easy recognition of contaminated
areas and also feels significantly cooler in the outdoor sun.
278X003 AFSC-CUL11-K-L UltraLite Kit, Size L, No Gloves $528.22 ea.
278X015 AFSC-CUL11-K-L00 UltraLite Kit, Size L, Class 00 Gloves $626.22 ea.
278X013 AFSC-CUL11-K-L0 UltraLite Kit, Size L, Class 0 Gloves $630.14 ea.
278X019 AFSC-CUL11-K-L2 UltraLite Kit, Size L, Class 2 Gloves $692.86 ea.
278X021 AFSC-CUL11-K-XL UltraLite Kit, Size XL, No Gloves $528.22 ea.
278X027 AFSC-CUL11-K-XL00 UltraLite Kit, Size XL, Class 00 Gloves $626.22 ea.
278X023 AFSC-CUL11-K-XL0 UltraLite Kit, Size XL, Class 0 Gloves $630.14 ea.
278X025 AFSC-CUL11-K-XL2 UltraLite Kit, Size XL, Class 2 Gloves $692.86 ea.
Visit us online for a full selection
of Arc Flash Kits and Gear
The Safety Tool Specialists
The Safety Tool Specialists
The Safety Tool Specialists
The Safety Tool Specialists The Safety Tool Specialists
The Safety Tool Specialists
12 CAL Class 2
Contractor Coverall Kit
The Cementex CFRCA12-L2 size large
12 Cal contractor coverall kit features
superior ARC flash resistant clothing and
accessories. This Class 2 coverall kit
includes 12 Cal/cm² ATPV large coveralls,
a dielectric hard hat with UV safety arc
flash shield, balaclava, tested size 10 Class
2 gloves, protector & storage bag, plus UV
safety glasses all in a standard storage bag.
278X203 CFRCA12-L2 Contractor Coverall Kit, Large $533.11 ea.
Other Sizes Available