6
ppc@pulsetech.com www.pulsetech.com 800-580-7554
Stock No./Part No. Description
100X805
XC-EXT 5'
5' Battery Lead Extension with
Standard Quick-Disconnect
Terminals
100X825
XC-EXT 25'
25' Battery Lead Extension with
Male and Female Connectors
100X830
XC-LUGS
2' Battery Lead with "Leave-On"
Eyelet Lugs and Standard Quick-
Disconnect Connectors
100X827
XC-CLIPS
2' Battery Lead with Clips and
Standard Quick-Disconnect
Connectors
735X834
CUP SET #4
Set of 4 Replacement Suction
Cups
740X130
ATP-EXT 15'
15' Extension Lead with 2 ATP
Connectors
740X138
ATP Y-CABLE
Parallel Y-Cable Connector Lead
6
SOLAR
MAINTENANCE
CHARGERS
SolarPulse Family
Solar Battery Maintainers and Chargers - 24V
24-VOLT SOLAR MAINTAINER CHARGERS
Name
Stock
Number
Wattage Voltage
Input
Electrical
Output
Current
Max Output
Voltage
Amp Hours
Per Day
Solar Panel
Dimensions
Circuit Box
Dimensions
Box-to-Lug
Wire Length
Box-to-Panel
Wire Length
SP-12 24V
Solar Charger
Maintainer
735X612 12W 24V
Solar
Power
323mA 33V 2.4Ah 9.8" x 12.6" x 0.13" 4.9" x 1.8" x 1" 50 in. 15 ft.
SP-25 24V
Solar Charger
Maintainer
735X791 25W 24V
Solar
Power
0.8A 29.6V 4.8Ah 17.9" x 14.3" x 0.2" 3.62" x 4.53" x 1.52" 10 ft. 15 ft.
SP-50 24V
Solar Charger
Maintainer
735X347 50W 24V
Solar
Power
1.62A 24V 9.72Ah 22" x 25.5" x 0.5" 3.62" x 4.53" x 1.52" 10 ft. 15 ft.
50W Panel Only 740X595 50W 24V Solar 1.62A 24V 9.72Ah 22" x 25.5" x 0.5" 3.62" x 4.53" x 1.52" 10 ft. 15 ft.
SP-100 24V
Solar Charger
Maintainer
735X348 100W 24V
Solar
Power
3.03A 24V 18Ah 34" x 27" x 0.5" 3.62" x 4.53" x 1.52" 10 ft. 15 ft.
100W Panel Only 740X609 100W 24V Solar 3.03A 24V 18Ah 34" x 27" x 0.5" 3.62" x 4.53" x 1.52" 10 ft. 15 ft.
Battery Maintainer Accessories
SP-12
SP-25 SP-50 50W Panel SP-100 100W Panel
The PulseTech
®
PT20 solar charge control-
ler features advanced pulse width modulated
(PWM) technology, temperature compensation
and advanced pre-programmed multi-staged
charging algorithms. With 12V and 24V auto-
switching, the unit automatically controls the
solar charging power and protects AGM, gel,
wet, lead acid and Li-ion batteries. The bat-
tery charge controller is used with solar panels
up to 400W (12V) and 800W (24V). It provides
protection from overvoltage, reverse polarity,
and reverse current from battery to solar panel.
Overcurrent protection is set at 22-amps. The
patented pulsing technology increases the life
of lead-acid batteries. The temperature sensor
is used only with lead-acid/AGM batteries. The
adapter allows bare wire connection to solar
input. The rugged 'all-weather' PT20 comes
with a temperature sensor (2.9m), fused bat-
tery harness (3m) and solar input adapter.
746X920 PT20 12/24V 20 Amp
Solar Pulse Charge Controller
Battery Voltage: 12/24V (Automatically Detected)
Max. Voltage on Battery Terminals: 40V
Rated Charge Current: 20 Amps
Min. Solar Input Voltage:
12V/24V Batt: 15V/30V
Max. Open Circuit Solar Panel
Voltage: 50V (recommended <28V for 12V)
Dimensions: 3.62" x 4.53" x 1.52"
PT20 Specifications
PT20 12/24V 20 Amp
Solar Pulse Charge Controller
