PulseTech Products

2026 Commercial Catalog

Issue link: https://read.dmtmag.com/i/1495554

Contents of this Issue

Navigation

Page 8 of 15

800-580-7554 www.pulsetech.com ppc@pulsetech.com ON-BOARD BATTERY MAINTENANCE TECHNOLOGY - PREVENT - MITIGATE 9 PowerPulse Maintenance Systems for 12/24/36/48 Volt Batteries • Every daily driver should have this product installed • Ensures peak battery performance • Extends battery life up to three times • Pulse Technology reduces and prevents sulfation buildup • Maximizes performance of frequently charged batteries • Provides greater charge acceptance to recharge faster • Virtually indestructible design • A good alternative solution to a Solar Pulse if your vehicle or equipment is not regularly out in the sun PowerPulse, a performance enhancing device, ensures maximum battery performance in frequently used vehicles or equipment. It does this by gen- erating an intermittent, high frequency pulse waveform that reduces existing sulfate deposits and keeps them from building up again. It is not a charger, but is used to supplement an existing charging system. PowerPulse works 24 hours a day without an electrical outlet. Accordingly, it should only be used on vehicles and equipment that are regularly used and frequently charged. The PowerPulse Maintenance System was selected as a Top 50 Product by Automotive Engineering magazine. It is available in 12-, 24-, 36- and 48-volt models. PowerPulse can be used on all lead-acid batteries including VRLA, AGM, gel and flooded cell batteries. It works with a single battery, batteries in parallel and batteries in series. For example the PP-48-L can be used with a single 48V battery, a 48V battery bank connected in parallel, and with four 12V or eight 6V batteries connected in series. Five-year limited warranty. 735X012 PP-12-L PowerPulse 12V Maintenance System 735X024 PP-24-L PowerPulse 24V Maintenance System 735X036 PP-36-L PowerPulse 36V Maintenance System 735X048 PP-48-L PowerPulse 48V Maintenance System 36V One PP-36-L can be used to maintain three 12-volt batteries in series or a PP-12-L can be connected to each 12-volt battery. Batteries in Series Dimensions: 4" x 1.75" x 1" Shipping Weight: 0.5 lb. Wire Length: 3' Specifications (All models) Batteries in Parallel One PP-12-L can be used to maintain (up to) three 12V batteries in parallel or a PP-12-L can be con- nected to each 12V battery. CCA and Voltage of Six Batteries After PowerPulse is Attached for One Year

Articles in this issue

Links on this page

view archives of PulseTech Products - 2026 Commercial Catalog