Issue link: https://read.dmtmag.com/i/1495554
800-580-7554 www.pulsetech.com ppc@pulsetech.com PULSE TECHNOLOGY 3 Pulse Technology Recover, Don't Replace Your Batteries Extend the Life of Your Battery Up To Three Times Through years of product development and independent scientific evaluation, it has been proven that if used routinely, Pulse Technology can extend battery life cycles up to three times. This reduces overall costs and environmental waste. Pulse Technology uniquely positions PulseTech's line-up of battery maintenance products and no other known battery charging/maintenance system offers these specific restorative maintenance characteristics. New – Never Filled 0 Cycles 120 Cycles 240 Cycles 360 Cycles 480 Cycles 12-Volt Lead-Acid Batteries Charged with Typical Charger 12-Volt Lead-Acid Batteries Charged with PulseTech Charger The Science Behind Patented Pulse Technology Pulse Technology is delivered to the battery through a circuit that is independent of the charging circuit. This patented, high-frequency pulse waveform is of a specific amplitude and frequency that is precisely controlled by microprocessors. It rises rapidly in less than one microsecond to its maximum amplitude and gradually returns to zero. There is no abrupt stop and no battery drain. This waveform occurs 25,000 times a second and has been PROVEN through university and military studies to remove sulfation from the battery plates and return the lead sulfate back to the electrolyte solution. Visual Proof of Pulse Technology Results The photos below are from an independent study comparing the use of Pulse Technology to conventional battery charging. The photos show actual battery plates after various charge and discharge cycles, which reveal the benefits of charging with Pulse Technology versus charging with a conventional charger. This row of battery plate images show plates from actual batteries charged with a competitor's battery charger, the white sulfate crystal deposit build up is common in batteries either left un-maintained or charged with a common battery charger. This row of battery plate images shows plates from actual batteries charged using PulseTech's patented Pulse Technology. Even after hundreds of cycles, the batter- ies charged using Pulse Technology have no sulfate accumulation, ensuring the batteries will still perform at peak capacity and live a long and useful life. Pulse Technology Waveform Battery Sulfation Battery sulfation is a naturally occurring "disease" within any lead acid battery that kills 80% of batteries worldwide. Through the proper maintenance application of PulseTech's patented Pulse Technology this problem can be eliminated. It is the ultimate solution for removing and preventing the power robbing growth of sulfate crystals on lead-acid battery plates. Without the application of Pulse Technology, over time, sulfates build up until your battery's efficiency is gradually diminished, preventing the battery from accepting and releasing energy, dramatically shortening your battery's life until it can no longer function.