Issue link: https://read.dmtmag.com/i/34500
PROPER FASTENERS FOR MICHELIN X ONE TIRES ON STUD PILOTED WHEELS ® ® It is important that the proper fasteners be used when mounting the MICHELIN ® X One tire on stud piloted ® wheels. If a fastener specified for the stud piloted aluminum wheel is used on a steel wheel, it will bottom out on the brake drum, and the proper clamping force necessary to help ensure that the torque on the wheel remains constant will not be achieved, possibly resulting in a “wheel off” situation. In the table below, the top fastener, Part No. 5554R&L is Part No. Replaces primarily for the Alcoa single mounted stud piloted aluminum wheel (example: 8.25 x 22.5") and 14.00 x 22.5" wide base stud piloted steel wheel. Part No. 5995R&L is for the Alcoa 14.00 x 22.5" wide base stud piloted aluminum wheel. The last two fasteners Part No. 5652R&L for a 3⁄4"–16 studs and 5977R&L for a 1-1⁄8"–16 studs are specified for the 14.00 x 22.5" stud piloted steel wheel. Thread Hex High Application and General Information 5554R&L Alcoa 5554R&L Budd 706 13/4 For Single Mounting of Alcoa Forged 3 " – 16 11 ⁄4 ⁄2 "1" Aluminum Disc Wheels and Steel Stud Piloted Wide Single Wheels. 5995R&L Alcoa 5995R&L Webb 178950R 178951L For Alcoa Wide Base Aluminum Wheels – “Long Grip” Cap Nut 3 " – 16 11 ⁄4 ⁄2"13 ⁄8 " Larger height provides greater lug wrench contact with the wheel. 5652R&L Zinc Dichromate Plating Accuride NTL/NTR 25 Budd 37888/9 Gunite 2564/65 Motor Wheel 84523/24 Steel Wheel: 3 " – 16 11 ⁄4 ⁄2 " 7⁄8 " Single Stud Mounting Front and Rear 5977R&L Hardened Zinc Yellow Dichromate Plating Alcoa 5977 R&L Accuride NTL/NTR 25 Alcoa 5552R&L Budd 37891/2 11 ⁄8" – 16 11 ⁄2 " 7⁄8 " NOTE: The table provided is for reference only. Wheel specific questions should be directed to the wheel manufacturer. Single Large Stud Mounting Front and Rear 8 Tire and Wheel Nomenclature