Issue link: https://read.dmtmag.com/i/34500
SPECIAL PROVISION FOR STEER AXLE USE ON 13.00 x 22.5" WHEELS 455/55R22.5 load range ‘M’ may be fitted with 13.00 x 22.5" wheels for first life use on the steer axles. The reduced loads shown in the following table must be observed. Technical specifications for MICHELIN 455/55R22.5 LRM with 13.00 x 22.5" wheels steer axle, first life only. Dimension Load Loaded Radius RPM Range in. mm. lbs. Max. Load Single psi kg. kPa 455/55R22.5 LRM 19.5 496 493 10000 120 4535 830 Dimension Load psi Range 75 kPa 520 80 550 85 590 90 620 95 660 100 690 105 720 110 760 115 790 120 830 455/55R22.5 LRM lbs. per axle 13740 14460 15180 15880 16600 17280 17980 18660 19340 20000 kg. per axle 6240 6520 6900 7180 7560 7820 8100 8460 8720 9070 To determine the proper load/inflation table, always refer to the markings on the tire sidewall for maximum load at cold pressure. Contact your MICHELIN dealer for tires with maximum loads and pressures other than indicated here. Load and inflation industry standards are in a constant state of change. Michelin continually updates its product information to reflect these changes. Therefore, printed material may not reflect the current load and inflation information. NOTE: Never exceed the wheel manufacturer’s maximum air pressure limitation. In order to be under Federal maximum width of 102", an inset wheel must be used. A 4.32" inset will net 101.5" overall width on some refuse vehicles. There are currently steel wheels available from Accuride and Hayes Lemmerz. Caution: Ensure the wheel does not interfere with vehicle components when making full turns. 13.00 x 22.5" – 15-DEGREE WHEEL SPECIFICATIONS Manufacturer Material Hayes Lemmerz Steel Steel Hayes Lemmerz Steel Steel Part No. 29802 10-hole, stud located, ball seat mounting – 11.25" bolt hole circle Accuride 10060TW 29811 White White 10-hole, hub piloted mounting – 285.75 mm bolt hole circle Accuride 10059TW White White Finish Weight (lbs.) 129 121 129 121 Outset 4.95 4.83 4.95 4.83 NOTE: The table provided is for reference only. Wheel specific questions should be directed to the wheel manufacturer. Accuride at www.accuridecorp.com Hayes Lemmerz at www.hayes-lemmerz.com Inset 4.32 4.32 4.32 4.32 Max Load & Inflation 11000 @ 110 11000 @ 130 11000 @ 110 11000 @ 130 10 Tire and Wheel Nomenclature