two-inch, flexible polypropylene tub-
ing that is threaded directly through
the existing B-Vent formerly used by
the tank water heater it is replacing.
As a result, there is no need to spend
time changing out the vent. In addi-
tion, water connections are located on
the top of the EZTR40, not the bottom.
This allows the flexible hot-and-cold-
water lines used by the tank-type water
heater to be quickly and easily recon-
nected to the new EZTR40.
Noritz America—www.noritz.com
MovinCool launChes
high-PerforManCe
Portable heat PuMP
MovinCool®, a brand of DENSO
Corporation, announced a new Climate
ProTM 18 portable heat pump, which
combines both cooling and heating
capabilities in a single, self-contained
unit. The compact system is 13% smaller
and 22% lighter than other comparable
heat pumps, yet it offers significantly
higher performance. The Climate Pro
18's cooling capacity of 14,600 Btu/h,
heating capacity of 13,700 Btu/h and
minimum operating temperature with
plenum of 24° F make this unit a top
performing system in its class. A new
controller features a larger LCD screen
that displays diagnostics and step-by-
step instructions to start, set up or
restore operation. The system is fully
compatible with most standard, off-the-
shelf wireless thermostats.
MovinCool—www.movincool.com
bosCh therMoteChnology
installation stand for
greenstar boilers
Bosch Thermotechnology has introduced
a new installation stand for use with its
full line of Greenstar high efficiency gas
condensing wall-mounted boilers. Now
all 8 Bosch Greenstar space heating and
combi-boilers can be installed on the
floor when wall-mounting is not con-
venient or possible. The new installa-
tion stand provides a small footprint
with an attractive modern appliance-style
appearance with matching boiler color
and profile. With its sturdy construction
(not just a frame on the floor - the stand
employs a floor support bracket that fits
snugly into a base holder), the installa-
tion stand provides sufficient space for a
condensate pump below the boiler unit.
Using the installation stand for floor-
mounting a Greenstar boiler offers the
same easy service and
accessibility of compo-
nents. Floor-mounted
Greenstar boilers have
the same connections
and accessories as their
wall-mounted coun-
terparts. The stand
can be pre-piped and
brought to the job
ready for hookups.
No additional train-
ing or components are
necessary to install a
Greenstar boiler on
top of the installation stand.
Bosch Thermotechnology—
www.boschheatingandcooling.com
www.fueloilnews.com | fuel oil neWs | noveMber 2014 35
