IDA Universal

May 2016

Issue link: https://read.dmtmag.com/i/674548

Contents of this Issue

Navigation

Page 18 of 59

I DA U N I V E R S A L M ay -J u n e 2 0 1 6 19 TRENDS AND TIDBITS continued from page 17 Trends continued on page 21 If you do business in Europe, you know the proposed Stage V emission limits for non-road diesel engines are scheduled to be in place by 2019. One of the signifi cant impacts expected of Stage V will be the introduction of a particle number (proposed) limit for engines in the 19 kW to 560 kW power band, which will necessitate use of DPF (diesel particulate fi lter) technology by OEMs. Current Stage IV emission standards test carbon monoxide (CO), hydro carbons (HC), nitrous oxides (NOx), and particulate matter (PM). e introduc- tion of the Particle Number (PN) standard requires the European Stage V emissions testing to not only measure the composition of the particles in the exhaust stream, but also count the number and size of those particles. e addition of PN means manufacturers will be forced to use a DPF fi lter on their diesel-powered machines to comply with the Stage V regulations. e John Deere Power Systems (JDPS) modular building block approach to emission control is proven and has led to a DPF solution that is capable of complying with the requirements indicated in the EU Commission's proposal COM (2014)581 concerning Stage V emissions, according to the company. One of the signifi cant impacts expected of Stage V will be the intro- duction of a particle number (PN) limit for engines in the 19 kW to 560 kW power band, which will necessitate use of DPF (diesel particulate fi lter) technology by OEMs. JDPS has been employing DPF technology since Interim Tier 4/Stage III B, with more than 150 million DPF hours logged in the fi eld, it says. JDPS says it is leveraging new catalyst technologies and emissions control calibrations to enable downsizing of their a ertreatment. OEMs benefi t by retaining the same engine performance in a reduced package size. e next genera- tion a ertreatment solutions from JDPS will deliver greater package fl exibility and off er easier installation, while providing up to a 20 percent reduction in size and up to 40 percent reduction in weight. "John Deere adopted DPF technology as part of an integrated emission control system, because it is the best solution for most applica- tions. By treating NOx and PM downstream of the engine, John Deere engines with DPF are optimized for increased torque response, low-speed torque, and fl uid effi ciency, and provide responsive power at higher altitudes," said John Piasecki, director of marketing, sales and customer support for JDPS. JDPS has extensive experi- ence with the development and integration of DPF technology in both John Deere and OEM equipment through Stage III B and Stage IV implementa- tion, the company says. is experience continues to lead to enhancements in effi ciency and optimization of a ertreat- ment solutions that strengthen application fl exibility for OEM customers. " is depth of diverse application experience extends throughout our distributor network and with all John Deere service dealers; they have a comfort level with DPF technology, because John Deere has been using it for years," Piasecki said. Piasecki said John Deere recognizes that as Stage V approaches, OEMs new to DPF technology may be worried it will add installation complexity or impact opera- tional performance. "We are committed to helping OEMs through every step of the application process to make it as seamless as possible," Piasecki said. "We are well positioned to transfer our experience level directly to our customers, giving them peace of mind and a distinct advan- tage in the process. John Deere has expertise in integrating the engine and drivetrain into the rest of the vehicle for optimized performance, operator convenience, fl uid economy and overall value." John Deere is prepared for the growing complexity in world emissions standards; by 2022, there may be at least fi ve diff erent levels of emissions standards globally. "We are fully committed to supporting our customers around the world with solutions to meet their unique application needs," said Geoff Stigler, director – sales, marketing and customer support – EAME, ASIA and AU for John Deere Power Systems. "OEMs, regardless of location, are best served through timely and strategic preparation, and John Deere is ready to help them identify and imple- ment the best solutions for their business. Our modular building block approach off ers greater application fl exibility to help OEMs meet increas- ingly challenging machine design goals." ● www.constructionequipment.com, 4/16 DEERE PREPARES FOR STAGE V TRANSITION

Articles in this issue

Links on this page

Archives of this issue

view archives of IDA Universal - May 2016