Issue link: https://read.dmtmag.com/i/81895
NUTS & BOLTS continued from page 43 Doosan DL300, DL350 Wheel Loaders Deliver Improved Performance Both Doosan wheel loaders Advancements to the Doosan DL300 and DL350 wheel loaders provide opera- tors with improved liſt capabili- ties, increased fuel effi ciency and enhanced cab comfort. Th is interim Tier 4-compliant machine (iT4) also has been engineered to deliver higher horsepower to tackle a wide variety of material handling applications - such as quar- ries, mines, road work and site development. High Performance Designed with improved liſt ing performance, the DL300 and DL350 off er operators the ability to set upper and lower limits for both the liſt arm and bucket stop positions from inside the cab. Better liſt ing capabilities improve cycle times in digging and loading applica- tions, while providing better control of the liſt arm and bucket positions. Th is feature allows the DL300 to eff ectively move material overhead with a dump height of 9 ſt . 4 inches (2.8 m), while the DL350 has a dump height of 10 ſt . (3 m). To keep the wheel loader running at optimal perfor- mance in dirty and dusty conditions, the DL300 and DL350 incorporate a new automatic-reversing cooling fan that uses less power to cool and clean the machine. Th e operator can select to reverse the fan via a switch, or it can be set to automatically reverse on a preset time frame. Each time the fan reverses, it will run in reverse for a few minutes to clean the cooling system. Th is results in longer working hours and shorter maintenance time to clean the cooling system. Operators also can expect upgraded driving performance options. As an alternative to the standard limited slip diff erential, the DL300 and DL350 off er optional hydrau- lic locking front diff erentials. Based on ground conditions, the operator can choose to lock the diff erential manually with a fl oor-mounted foot switch, or allow the machine to automati- cally engage the system. Th is provides increased driving power when one wheel spins or loses traction and improves machine performance when navigating tough terrain. Another optional perfor- mance advancement for the DL300 and DL350 is a torque converter lockup clutch. Th is enables the machine to climb grades easier and faster, increasing productivity as much as 20 percent in certain stockpiling applications. Greater Power and Fuel Effi ciency Th e 4.2-cu.-yd. (3.2 cu m) DL300 has been re-launched as a 271 hp (202 kW) iT4 wheel loader - up from 217 hp (162 kW) in its previous design. It is engineered with a breakout force of 37,993 lbs., a full-turn tipping capacity of 28,572 lbs. and a dump height of 9 ſt . 4 in. Th e 4.8-cu.-yd. (3.7 cu m) DL350 has been re-engineered as a 271 hp iT4 wheel loader. It provides operators with a breakout force of 37,768 lbs., a full-turn tipping capacity of 31,118 lbs. and 10-ſt . dump height. IDA UNIVERSAL September-October 2012 are equipped with 5-cylinder diesel engines that have been optimized for use with selec- tive catalyst reduction (SCR) and diesel exhaust fl uid (DEF) to comply with iT4 emission regulations. Engines with this confi guration are optimized to reduce particulate matter (PM) by operating at higher com- bustion temperatures and to reduce nitro- gen oxides (NOX) with exhaust aſt er treatment using SCR technology. Addition- ally, SCR systems off er increased fuel effi - ciency -- as much as 16 percent on this machine -- due to the engine optimization, which improves fuel burn, according to the manufacturer. Th is wheel loader's new auto-idle feature provides addi- tional noise reduction and fuel savings by reducing the work- ing idle of the wheel loader from 950 rpm to a standby idle setting of 750 rpm when the machine is inactive for a short period of time. Th e 568-cu.-in. (9,308 cu cm) engine features a high- pressure common-rail (HPCR) design with direct fuel injec- tion, electronic control and four valves per cylinder. Th e high-pressure common-rail system increases the effi ciency of fuel delivery by increasing the pressure up to 34,000 psi. Th e increased pressure allows the injector to inject a fi ner mist into the engine, which results in a more effi cient com- bustion that in turn produces more torque and improved fuel economy, less noise, lower operating costs and cleaner exhaust. Increased Reliability More new options for Doosan wheel loaders include a diesel-powered coolant heater to improve starting in cold weather or a block heater that warms the engine coolant before engine startup with an electrical heater. Service inter- vals on the front liſt arm pins have increased fi vefold, from 50 to 250 hours, reducing oper- ating costs and downtime. Tilt cylinder hydraulic hoses have been rerouted for improved hose reliability, better hose movement and improved vis- ibility to the attachment. ● www.constructionequipmentguide.com Nuts & Bolts continued on page 57 55

