Issue link: http://read.dmtmag.com/i/133589
MAINTAIN: PRO-12-RP PRO-12-RP 12-Station, 12-Volt Battery Maintenance System • Low-amperage patented pulse trickle charge offsets normal discharge rate • Maintains up to 12 batteries in "factoryfresh" condition indefinitely • Works with all 12-volt lead-acid batteries The PRO-12-RP 12-Station Battery Maintenance System preserves new batteries at peak charge levels by keeping the plates in like-new condition during storage. It works with all 12-volt lead-acid batteries, including flooded, AGM, VRLA and gel. It keeps up to 12 batteries as new as the day they were manufactured. Batteries that sit idle continually discharge and are subject to a naturally occurring build-up of lead sulfate deposits that reduce the battery's ability to accept, store and release energy. PRO-12-RP tackles both problems. A continuous cycle of low-amp charging rotates through the 12 channels reversing the normal discharge rate. At the same time, optimized high-frequency patented pulsing reduces the size and number of lead sulfate deposits. The result is shelved batteries that stay "factory fresh." The maintenance system uses a single ac outlet safely with no sparking between the battery leads. To use, simply connect from one to twelve charged 12-volt batteries. An audible alarm sounds if a battery is connected improperly. The PRO-12-RP initiates a self-test on each battery and LED indicators will come on green, turn yellow and then red. Then it begins cycling through each of the connected batteries maintaining them at optimum levels. Two-year limited warranty. 746X915 PRO-12-RP Maintenance System 735X243 Replacement 3-Cable Module Specifications LED Indicators Located on the top of the unit, the LEDs show the condition of each battery. RED - Battery is low YELLOW - Battery is marginal GREEN - Battery is ready for issue Audible Alarm indicates improper connection Note: LEDs cycle to show the status of each battery at a time. All LEDs will not be on at the same time, as shown. Input Voltage: 100-240 V ac, 50-60 Hz No. of Outputs: 12 Max Charge DC Voltage: 14.7 V Max Charging DC Current: 750 mA 14 Reverse Polarity Protected: Yes Box-to-Clamps Wire Length: 72" Dimensions: 7.25"L x 2.35"W x 1"H Weight: 2 lbs. Applications Ideal for battery sales outlets and maintenance facilities that sell, stock or service lead-acid batteries. Fleet operators can keep new batteries in ready-to-go condition until they are installed on vehicles or equipment. Battery companies can reduce battery warranty claims. www.xtremecharge.com