Issue link: http://read.dmtmag.com/i/154428
The 12-Volt Solar Charger Maintainer provides a full five watts of power in a compact, durable solar panel. That's almost half the size of solar panels used in other solar chargers providing the most installation options for your vehicle or equipment. The solar panel replaces the power loss from electrical accessories that occurs even when the ignition is switched off. This unit utilizes our unrivaled solar charging system combined with our patented optimized high frequency pulsing circuit to ensure unused batteries will start when needed and last up to five times longer. Pulse Technology reverses the naturally occurring process of battery sulfation – the main cause of battery failure. Specifications Output Current: 350 mA Box to Lug Wire Length: 3' Solar Panel Dimensions: 8.8" x 8.8" x 0.25" 735X305 NSN 6130-01-446-7154 SP-5 5-Watt 12-Volt Solar Battery Charger Circuit Box Dimensions: 3.4" x 2.4" x 1.5" Input Current: Solar Powered SOLAR PRODUCTS SP-5 5-Watt 12-Volt Solar Battery Charger Box to Panel Wire Length: 17' 24VPSC 6.3-Watt 24-Volt Solar Battery Charger The 24-Volt Solar Battery Charger charges and desulfates 24-volt lead-acid battery systems (conventional flooded, sealed "maintenance-free" VRLA and AGM) on vehicles or equipment stored outside. No AC power is needed when the sun's energy is harnessed to prevent the normal loss of battery power on stored vehicles, generators and heavy equipment, no matter how long they sit unused . The unit provides high frequency optimized pulsing across two, four or six batteries wired in series parallel. Safe, reliable and weatherproof, this unit prevents dead batteries by keeping them in like-new condition all the time. A 12-volt version is also available. 735X640 NSN 6130-01-487-0035 24VPSC 24V Solar Battery Charger 735X740 NSN 6130-01-546-8432 12VPSC 12V Solar Battery Charger DLA Inventory Stock Item: NSNs 6130-01-487-0035 6130-01-546-8432 24VPSC Specifications Output Current: 28 V, 6.3 W panels with a 225 mA output Input Current: Solar Powered Solar Panel Dimensions: 9" x 11" x 0.25" PRU Enclosure Dimensions: 4.9" x 1.8" x 1.0" Leads (Box to Ring Terminal): 50" Length of Wire from Solar Box to Panel: 25' 24VPSC REV-F 6.3-Watt 24V Solar Battery Charger w/Test The Solar Battery Charger with Push-To-Test charges and desulfates 24-volt lead-acid battery systems on vehicles or equipment stored outside, like the Pulse Solar Charger above. However, it also includes a Push-To-Test feature which instantly delivers the battery's state of charge as 25%, 50%, 75% or 100%. With the push of a button you always know the condition of your battery. In addition to preventing the normal loss of battery power, optimized frequency pulsing constantly works to minimize and reduce naturally occurring battery sulfation — the main cause of battery failures. By reducing the size and number of lead sulfate deposits on the battery plates, your battery will charge deeper, maintain greater reserve capacity and last longer. Specifications Output Current: 28V, 6.3 W panels with a 225 mA output 735X643 NSN 6130-01-497-0964 24VPSC REV-F 6.3-Watt 24-Volt Solar Battery Charger w/Test 800-580-7554 www.pulsetech.net Input Current: Solar Powered Solar Power Dimensions: 9" x 11" x 0.25" Lead from Solar Panel to Push-to-Test: 25' Push-to-Test Enclosure Dimensions: 4.9" x 2.25" x 1.5" Lead from PRU to Push-to-Test: 10' 13