Issue link: http://read.dmtmag.com/i/154428
MAINTENANCE CHARGERS Pro-12 12-Station Battery Maintainer • Preserves new and restored 12V batteries at peak charge levels • Maintains one to 12 batteries at a time • Patented Pulse Technology removes sulfation buildup The Pro-12 maintains one to 12 new and restored 12-volt lead-acid batteries so they stay in like-new condition during storage. A continuous cycle of low amp charging rotates through the 12 channels reversing the normal discharge rate. PulseTech's patented Pulse Technology removes lead-sulfate deposits so shelved batteries stay in likenew condition enabling batteries to charge deeper, maintain greater reserve capacity and last up to five times longer. LEDs indicate if the battery is discharged, marginal or ready for use and an audible alarm sounds if the cable connections are reversed. These features simplify operations and minimizing operator training requirements. System is not designed for batteries below 11.5 volts. 746X912 NSN 6130-01-535-2718 Pro-12 12-Station Battery Maintainer Specifications Output Current: 750 mA Dimensions: 7.25" x 2.25" x 1" Input Voltage: 100 VAC to 240 VAC Weight: 2 lbs. Input Current: 140 mA Box-to-Clamps: 72" X2 Xtreme Charge® Two-Station Battery Charger • Charges and maintains two 12-volt lead-acid batteries • Works on two independent or two in-series batteries • For VRLA, AGM and flooded 12-volt batteries Doubling your charging capability saves time and money. The X2 independently monitors, charges and maintains two 12-volt lead-acid batteries from one ac outlet without overcharging. This charger can also be used for 24-volt systems composed of two 12-volt batteries connected in series, like those used in military vehicles and equipment. This fuse-protected, spark-proof maintenance charger works automatically on any type of 12-volt lead-acid battery. Propriety algorithms combined with microprocessor controlled technology deliver the precise charge rate based on the size and condition of the individual battery. During the maintenance cycle PulseTech's patented Pulse Technology minimizes and reduces naturally occurring battery sulfation – the main cause of battery failures. Thus the battery will charge deeper, maintain greater reserve capacity and last longer. Status lights show when the unit is on, pulsing and charging. They also indicate the percentage of the battery's state of charge at 25%, 50%, 75% and 100% making the X2 easy to understand and use. Specifications Output Current: 2.5 A dc Max per Station 100X200 NSN 6130-01-458-0984 X2 Xtreme Charge Two-Station Battery Charger 10 DLA Inventory Stock Item: NSN 6130-01-458-0984 Weight: 2.73 lbs. Input Voltage: 100 V ac to 250 V ac Power Cord Length: 6' Input Current: 0.6 Amps Max Main Battery Cable Length: 2.73 lbs. Dimensions: 7.9" x 6.3" x 2.4" Lug/Clamp Cable Length: 2' www.pulsetech.net 800-580-7554