Rotobec introduced its first
construction breakers. Eight
models of Monoblock breakers are built to fit excavators
ranging from 0.018 to 15 tons.
Designed for low maintenance
and easy access to components,
they have a patented polyurethane jacket to reduce impact
vibrations transferred to the
machine, as well as reduce
noise. The breaker's pistons are
mounted on bushings to extend
the life of the cylinder, while
diagram accumulators are used
for consistent performance.
Tie-Rod breakers incorporate a heavy-duty tie-rod assembly that
is said to help eliminate the possibility of rod assembly failure and
ease maintenance. The line is available in five models to fit excavators ranging from 17 to 72 tons. Features include pistons mounted
on three cylinders, a manual stroke adjuster and a hydraulic break
on the piston that prohibits blank firing.
Truck weight sensor
Truck Weight introduced a new wireless sensor for mechanical
suspension systems that provides off-road and severe service
fleets with a low-cost and simple-to-install alternative to traditional load-cell systems for onboard scales. When used with
the company's Smart Scale onboard scales, the sensors have
tested to be accurate within a range of 1 to 2 percent. The
company says the sensors cost approximately 75 percent less
than traditional, hardwired onboard scale load-cell systems
while installation time is about one to two hours.
Always Has Been, Always Will Be
Fine Material Screw Washers
Sand Classifying Tanks
Coarse Material Screw Washers
Road Based Mixers
129 East Holcomb Avenue, Des Moines, IA 50313 USA
+1 (515) 243 1123 | eiwllc.com
Text INFO to 205-289-3782 or visit www.aggman.com/info
AGGREGATES MANAGER October 2013
5/13/13 3:14 PM
Text INFO to 205-289-3782, or visit aggman.com/info.
9/18/13 3:31 PM