Landscape and Irrigation is read by decision makers throughout the landscape and irrigation markets — including contractors, landscape architects, professional grounds managers, and irrigation and water mgmt companies and reaches the entire spetrum.
Issue link: http://read.dmtmag.com/i/391459
www.landscapeirrigation.com Landscape and Irrigation October 2014 41 Product rounduP CHain SawS and Stump GrinderS Echo BEar cat SG340 Stump GrindEr The Echo Bear Cat SG340 stump grinder boasts a compact design and carbide steel cutting teeth, making getting rid of tree stumps a breeze. The 12 hardened carbide steel cut- ting teeth rotate at 3,600 rpm for fast grinding, smooth cutting, and smaller chips and debris. With the compact body width of only 23 inches, getting close to buildings or fitting through gate openings to access stumps is quick and easy. Other features of the SG340 include a 340-cc Honda OHV engine, 22-inch 4-ply pneumatic tires, double-banded belt drive, and fully en- closed housing. The SG340's unique horizontal cut allows the operator to shave unsightly tree roots, without cutting them, and it reduces machine kickback. Efco 152 chain Saw The 152 chain saw from efco features a 3.4- hp./51.7-cc engine, which is ideal for felling medium- to large-size trees and for frequent firewood cutting. Weighing only 10.7 pounds, the 152 has an excellent power-to-weight ratio. The 152 is backed by efco's "Five-Year, No-Fear" consumer warranty and "Titanium Two-Year" commercial warranty. That way, operators can focus on the task at hand and be confident that their efco power tools will continue to work job after job. huSqvarna 543 Xp chain Saw The light and effective Husqvarna 543 XP chain saw was developed for professional loggers and skilled land owners. The low weight and high chain speed lead to efficient limbing work. Its unique X-Torq engine technology provides more power where needed, up to 20-percent less fuel consumption, and up to 75-percent less exhaust emissions in accordance with the world´s most stringent environmental regulations. The adjusting fuel pump allows the operator to control oil flow depending on application and weather conditions. JonSErEd woodSman cS2255 chain Saw Jonsered's Woodsman CS2255 is a new- generation, robust chain saw. Developed for cutting jobs where a high-powered, responsive chain saw is needed, the CS2255 is ideal for demanding part-time professionals and forest owners. Its new Clean Power engine technol- ogy delivers high revs over a wider rpm range, as well as provides lower fuel consumption and reduced emission levels. The CS2255 also features air purge for easier starting. It is avail- able with a tool-free chain tensioner for quick and easy tool-free tensioning and assembly of bar and chain. LEonardi m1 BLuEShark cuttinG SyStEm The M1 Blueshark cutting system for machines up to 40-hp. has simplified tooth ordering and maintenance. Only one tooth needed; no more rights, lefts, straights or pockets. Teeth are 3-position indexable, and new Rock Guard Technology ensures you get use of all indexes. Only one tool is required for changing and indexing, saving you time and money. Blue- shark's reduced wheel weight allows for easier maneuverability, decreased operator effort, better balance, and less clutch and belt wear. It has improved cutting in both directions, and also allows for plunging. mackiSSic compact portaBLE Stump cuttEr MacKissic's compact portable stump cutter is lightweight; only 25 inches wide; and easy to use, load, and get to the job without causing turf damage. MacKissic's patented cutter head system with 9 carbide-tipped teeth in 45-degree, 25-degree and straight configuration provides smooth cutting action. MacKissic's compact portable stump cutter's adjustable handlebar converts to rear or front operation, offering excellent visibility, access to tight spots, and the ability to see exactly where the cutter head is at all times for quicker stump removal. This unique operator position also provides extended wear to the cutter teeth because the operator can avoid rocks and other foreign debris. MacK- issic's exclusive braking system stops the cutter head in less than 2 seconds when the operator presence lever is released, providing unparal- leled safety. MacKissic's bumper, kickstand and patented cutter head make this a user-friendly unit. Units are available with a Briggs & Stratton, Robin or Honda engine.