Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Metalworking Technical Training Cutting and Grinding 1 800 255 4417 www.castrol.com/GPS March 2017 Workpiece Metallurgy Cast Iron Grey cast iron consists of an iron base with graphite dispersed throughout. It is very easy to machine and produces short, easily broken chips and lots of fine, black dust. The cutting fluid serves a minor purpose in terms of lubrication and cooling of the tool but is just as important for ancillary properties such as dust collection and corrosion protection. If the wrong coolant is selected, the cast iron dust will leave smutty residues through- out the machine. Two other types of cast iron found in industry include: Ductile Iron • Also called nodular iron or spheroidal graphite (SG) iron • Graphite has a nodular structure versus the flake structure in grey cast iron • Flexibility (ductility) is better than that of grey iron (less brittle) • Machinability is lower than with grey iron Compacted Graphite Iron (CGI) • Graphite is shorter, thicker and more compact than grey cast iron • Greater strength and better flexibility than grey iron, allowing for lighter finished parts • Gaining popularity amongst auto manufacturers • Significantly more difficult to machine than grey iron, machining more like carbon steel. This requires lower machining speeds and produces lower tool life Semi-synthetic coolants with low oil content and synthetics are generally used on cast iron. Good, positive filtration such as paper or bag filter is also needed. Yellow Metals Copper and its alloys are often referred to as yellow metals due to their color. Like pure aluminum, pure copper is "sticky," making it difficult to machine. It also produces long continuous chips that can interfere with the cutting process. Brass is a combination of copper and zinc and may also have lead added. Leaded brass is very easy to machine. Unleaded brass, also called compliant brass, is more difficult to machine but still relatively easy. The more difficult alloys to machine include bronze (copper alloyed with tin), oxygen-free copper, and alloys with magnesium, aluminum or phosphorus. Figure 14. Brass fittings. Steel Steel comprises a large variety of metals with iron as the base material. With such a huge range, the machinability of steels varies dramatically. Basic carbon steel is produced by adding carbon to iron, with higher levels of carbon producing a harder material. As the hardness goes up, the machinability goes down. Low carbon steel = <0.3% carbon Medium carbon steel = 0.3% – 0.6% carbon High carbon steel = >0.6% carbon Heat treatment and work hardening also affect the difficulty of machining. Machinability can be improved by adding sulfur or lead to the metallurgy, creating what is often called free machining steel. To create special properties, alloy steels are formed by adding other materials to the mix such as chromium, molybdenum, nickel, silicon, vanadium or manganese. SAE has classified steels into 4-digit codes as shown in Figure 15. For example, 1040 steel is a medium carbon steel with 0.40% carbon. Figure 15. Classifications of steel types by Society of Automotive Engineers (SAE). Major Classification of Steel SAE Designation Type 1xxx Carbon steels 2xxx Nickel steels 3xxx Nickel-chromium steels 4xxx Molybdenum steels 5xxx Chromium steels 6xxx Chromium-vanadium steels 7xxx Tungsten steels 8xxx Nickel-chromium-vanadium steels 9xxx Silicon-manganese steels Q10

