Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 261 of 385

Technical Training and Reference Info Metalworking Technical Training Cutting and Grinding 1 800 255 4417 www.castrol.com/GPS March 2017 Troubleshooting PROBLEM POTENTIAL CAUSE SOLUTION ODOR (Chemical or Biological) High concentration Add water to reduce concentration to target range. Low concentration or low add rates Add coolant concentrate on a regular basis. Cleaner contamination Keep cleaners, mop water and other chemicals out of system. High tramp oil Reduce leaks and use skimmers. High dirt/fines Correct or improve filtration system. Clean system thoroughly. Low pH Use pH booster additive. Determine cause of low pH (e.g., presence of bacteria). Stagnant fluid Circulate or aerate fluid regularly. POOR MACHINING OR TOOL LIFE Low concentration Add coolant concentrate to increase to target range. High tramp oil Reduce leaks and use skimmers. High dirt/fines Correct or improve filtration system. Clean system thoroughly. High hardness Use treated water (DI or RO). Dump system to remove hardness. Wrong coolant Verify coolant has performance capable for all operations. Poor coolant flow Ensure flow rates and pressure are suited to application. Wrong coolant direction Ensure coolant nozzles are properly directed to point-of-cut. Poor tool regrind Check tool regrind process for defects. Metallurgy change Verify specifications for incoming batch of materials DERMAL IRRITATION High concentration Add water to reduce concentration to target range. High tramp oil Reduce leaks and use skimmers. High dirt/fines/metals Check for sensitizer metals (zinc, chromium, nickel, cobalt). Correct or improve filtration system. Clean system thoroughly. Cleaner contamination/ high pH Keep cleaners, mop water and other chemicals out of system. Excess mist or splash Reduce flows; install protection; improve mist collectors. Personal hygiene Use proper PPE and other precautions to prevent exposure. Figure 26-2. Causes and solutions for common metal cutting problems. Q24

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES