Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Metalworking Technical Training Cleaners 1 800 255 4417 www.castrol.com/GPS March 2017 Cleaner Types Acidic Cleaner Alkaline Cleaner Emulsion Cleaner • Work great as rust removers • Usually immersion type washers • Work well for very difficult soils — Pigmented drawing compounds — Greases • Phosphoric acid and citric acid are most common (Orange cleaners) Potentially all system types can use alkaline cleaners. Concentration can be varied depending on cleaning needs. Alkalinity (pH >7) provides: • Corrosion protection • Surfactant performance • Bio-resistance Surfactants/Detergents/Soaps • Up to 10% of formula and provide: — Wetting (reduced surface tension) — Solubilizing/suspension of soils — Chelation (ties up metallic ions) Water-soluble oil emulsions can be varied in concentration depending on requirements. • Generally used in immersion or spray washers • Emulsifies soils and carries back to filtration • Very good rust protection due to oil film • Light to medium soil removal • Can grow bacteria if unheated or a poor formulation is used Maintenance Cleaners The maintenance cleaner category contains alkaline products designed to clean floors, walls and windows, and equipment including machine tools. This type could include very high pH cleaners for removing rust from parts as an alternative to acidic cleaners or special machine tool cleaners, which aid in removing dirt, sludge and biofilm from all areas of the machine. Floor cleaners are specially designed to provide good cleaning at low concentrations and ambient temperature conditions, fast drying characteristics and non-slip residue. Choosing the Proper Cleaner Type Regardless of the type of washer in which the cleaner will be used, a major consideration for satisfactory cleaning is to choose a cleaner whose chemistry is appropriate for the cleaning needs. Aluminum and copper based alloys are particularly sensitive to stains, so cleaners with stain inhibitors and milder components and/or more neutral pH will be selected to avoid stain and damage to these workpieces. Another consideration with ferrous alloys is the need to provide rust protection to prevent the parts from immediately beginning to rust. Therefore, when selecting a cleaner, review the product's characteristics carefully to confirm which materials are safe to be cleaned by the candidate product. Castrol cleaners provide short-term, in-process rust protection until the workpiece is dried and protected for longer term requirements. Key information that aids in choosing the proper cleaner includes: • Customer cleaner type preference • Part metallurgy • Soils being removed • Washer type • Rust protection needed • Bath temperature • Filtration and conditioning equipment (i.e., skimmers) in use • Water type and quality • Pre and post operations Figure 4. Characteristics of aqueous cleaner types. Q29

