Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 267 of 385

Technical Training and Reference Info Metalworking Technical Training Cleaners 1 800 255 4417 www.castrol.com/GPS March 2017 Soil Types In an industrial cleaning environment, soils typically consist of one or more of the following: • Chips and swarf • Oils (lubricants, cutting oils, forming oils) • Metalworking fluids – i.e., coolants (synthetic, semi-synthetic, soluble oil) • Greases • Rust preventives • Surface corrosion Business practicalities drive the customer to consider balancing the need for part cleanliness with the following factors: • Cost of treating chemical effluents (disposal) • Cost of heating the bath • Improvement of time utilization of manufacturing (e.g., to "do it quickly") Another key factor is the question, "how clean is clean enough?" Consider the chart in figure 5. As Figure 5 reveals, many applications – but not all of them – require high levels of cleanliness. It is important to understand what happens after the washer to be sure that an appropriate choice is being made. To reach the goal of economical and effective cleaning, wash processes tend to have these traits: • Mechanically intensive processes • Mild chemicals • Ambient/moderate temperatures Figure 5. Cleaning requirements for various manufacturing processes. Q30

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES