Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 273 of 385

Technical Training and Reference Info Metalworking Technical Training Cleaners 1 800 255 4417 www.castrol.com/GPS March 2017 Control and Care of Cleaners Controlling Contamination Filtration Some types of contamination are able to be minimized with appropriate equipment. • Dirt can be dealt with by using effective filtration. • Drag chains, screens, magnetic separators, cartridge filters, bag filters, indexable paper media, vacuum filtration, cyclonic filters and pressure bed filters are all options for wash fluid filtration. • If chips and fines are the principle soil, good filtration is essential to extending the service life of a cleaner. Skimmers Oil-rejecting spray cleaners are ideally suited for washing oily soils. As the fluid chemistry promotes the tramp oil to float freely, using surface-skimming devices (belts, ropes, coalescers, disks, etc.) can help remove this contamination, which is often a source of food for bacterial growth. A well-designed skimming system can contribute significantly to extending the life of alkaline cleaners. Recycling Systems In some circumstances, it may be reasonable to consider a central recycling system to extend the life of wash fluids. This option allows a customer with minimum filtration on a group of washers to avoid constant discarding of contaminated cleaners. For example: Perhaps the plant footprint doesn't permit the installation of additional filtration at the washer locations in the plant. By using transfer tanks or transfer plumbing and a central recycling system (which usually employs oil skimming and additional filtration), dirty or oily fluids can be reconditioned and their use extended. Other waterborne contaminants, like hardness and chlorides if allowed to build to excessive levels, are beyond the reach of filtration or other actions. • High levels will necessitate partial or complete dumps of the washer reservoir to bring levels back to reasonable ranges. Because these contaminants leave no options other than dumping, it strengthens the case to consider the use of treated water. • Remember that dumping will eventually happen to all cleaning fluids, as their functional life is finite; attempting to use depleted, contaminated cleaners only jeopardizes the value of time and labor invested in the parts being washed. With reasonable and responsive care, cleaning products can be maintained to enable the customer to get full value from washing operations. This care requires dedication, but to reiterate the above, diligence prevents scrap and rework of workpieces that have had much labor and time invested in their production. Q36

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES