Issue link: http://read.dmtmag.com/i/814629
Corrosion Preventives Technical Training and Reference Info Metalworking Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Special Properties It is not unusual for many rust preventives to have special properties, whereby additives are used to enhance the protection beyond that provided by the rust-inhibiting barrier film. These extra properties include the following: Water displacement • The most common enhanced feature, especially in solvent based rust preventives • Often referred to as dewatering Demulsibility • Descriptive term for the capacity of a water displacing rust preventive to have the water separate and settle to the dip tank bottom • Differs from water displacement/dewatering in that displacement is the process of the water being lifted from the workpiece, and demulsibility is the capability of water to separate and settle out of the rust preventive • Allows the working layer of corrosion preventive to be water-free Fingerprint neutralization and suppression • Another common group of features of solvent-based products, and important for use on parts where handling has occurred or hand assembly is expected. Can also be built into neat oil rust preventives. • The distinction between the two is: — Finger print neutralization targets parts that have already been handled prior to the application of the rust preventive, effectively deactivating the corrosive nature of sweaty fingertips — Finger print suppression will prevent fingerprint stains from occurring on parts that have already been protected with the inhibitor Acid atmosphere neutralization • Consists of buffering chemistry to react with and neutralize acid • Parts that may be stored in the presence of acid fumes will have extra protection • Examples include parts stored, perhaps as work in progress, near a plating operation or near a fork-lift battery charging station Salt atmosphere protection • Similar to acid atmosphere protection chemistry, but especially designed for trans-ocean protection needs Lubricity • Usually gained through wax film type products • Helps reduce torque requirements for fasteners in assembly operations Detergency • A feature often built-in with the fingerprint neutralization chemistry • Also added to wax-based inhibitors that can be applied over lightly oiled surfaces, with no detrimental adhesion difficulty Q46

