Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Fundamentals of Lubrication Lubrication The Three Regimes The three lubrication regimes can occur within the same application as conditions change. For example: at rest, a plain journal bearing will have zero speed and thus will have full metal-to-metal contact, putting it in Regime III Boundary Lubrication. But as the shaft of the bearing begins to turn, an oil film will begin to generate, moving the application into Regime II Mixed Film Lubrication. And once the bearing is up to full operating speed and temperature, it will ideally be in Regime I Hydrodynamic Lubrication. (This scenario is contingent on the ideal conditions being met regarding speed, load, temperature and oil viscosity.) In hydrodynamic lubrication, the only friction present is due to fluid friction, since the metal surfaces do not come in contact. Viscosity x Velocity Load Regime III: Boundary Lubrication Regime II: Mixed-Film Lubrication Regime I: Hydrodynamic Lubrication Coefficient of Friction ( ) Figure 13. The Stribeck Curve demonstrates how viscosity, velocity and load determine the coefficient of friction and the lubrication regime. The various conditions that determine the oil film thickness – and thus the lubrication regime – can be demonstrated by the Stribeck Curve (Figure 13). • As viscosity and velocity decrease and load increases, we move to the left on the curve, showing an increase in friction and a reduction of oil film; eventually, boundary lubrication conditions prevail. • As viscosity and velocity increase and load decreases, we move to the right on the curve, showing that the coefficient of friction is reduced, a larger oil film is created – and eventually, hydrodynamic lubrication is reached. If viscosity and/or velocity continue to increase, fluid friction will prevail, which explains the upward trend of the curve at the end that shows an increase in friction even with full hydrodynamic lubrication. R7

