Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Fundamentals of Lubrication Types of Wear One of the key purposes of lubrication is to reduce and/or control wear. Wear may come in many forms as shown here: Adhesive Wear Adherence and welding causing material loss and/or transfer. Adhesive wear damage under high magnification Abrasive Wear Abrasive medium causing physical damage. Abrasive material may be: • Wear debris • Atmospheric contamination • Solid by-product of oxidation • Contamination due to handling Abrasive wear damage under high magnification. Corrosive Wear Surface deterioration resulting from chemical attack. Stopping corrosion can eliminate premature failure of equipment, especially that which is due to a loss of critical tolerances. Corrosive wear may be caused by: • Water (most common) • Process chemicals • Oil oxidation by-products Adhesion # 1 Adhesi on Welding # 2 Wear Debris Shearing # 3 #1 Metal surfaces have a natural affinity for each other and can adhere #2 Under pressure, local temperatures of the metal can be extremely high. Welding of the two surfaces will occur. This is called "cold welding," as the bulk of the metal remains cold. #3 As the two surfaces move relative to each other, the cold weld shears, causing metal removal. Wear debris is released and goes on to create abrasive wear, thus increasing the overall wear rate. Wear Debris Embedded Particle Wear Debris Loose Particle Loose and embedded particles create significant wear within a system. This wear creates small particles that go on to cause more abrasive wear, thus compounding the problem. R8

