Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 298 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Fundamentals of Lubrication Base Oil Types Synthetic Base Oils Synthetic oils are man-made oils formed by a chemical reaction process. The base fluid's molecular structure is planned and controlled; as a result, the properties are very predictable. The main benefits and limitations of synthetics are shown in Figure 21; these will vary by synthetic type. Currently, synthetics account for a small percentage of the market, due primarily to their higher cost. However, they continue to "gain ground" on mineral oils as engine oil and other industry specifications become stricter. The major classes of synthetics include: Benefits Limitations Greater oxidative stability (long life) Higher purchasing cost Wider operating temperature range Potential incompatibility with seals Lower pour point Potential incompatibility with other fluids Higher flash and fire points Possible storage and handling challenges Reduced deposit formation Higher disposal cost Improved film strength Fluid misapplication potential Lower volatility Figure 21. General benefits and drawbacks of synthetics. DESCRIPTION KEY BENEFITS KEY DRAWBACKS PAO (Polyalphaolefin) • a.k.a. Synthetic HydroCarbons (SHC) • Have similar properties to paraffinic mineral oils • Exhibit the best properties of a paraffinic oil without the drawbacks • Excellent compatibility with seals and mineral oils • High viscosity index • Good oxidative and thermal stability • Low pour points • Limited additive solubility and response • Higher cost than mineral oil Organic Esters • Consist of diesters, polyol esters, and phosphate esters • Diesters have excellent solubility • Phosphate and polyol esters are used as fire-resistant hydraulic fluids • High oxidation stability • Good anti-wear • Excellent additive solubility and residue control • Low vapor pressure • Poor seal and paint compatibility • Phosphate esters have low VIs • Higher cost than mineral oil PAG (PolyAlkyleneGlycol) • Various forms, including polyethers, polyglycol ethers, polyether polyols • Most are miscible with water • Most have poor compatibility with other oils • Excellent lubricity (very low coefficient of friction) • Very high viscosity index (up to 300+) • Good additive solubility • Poor compatibility with other oils • Water solubility • Very high cost R12

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES