Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Fundamentals of Lubrication Layer of Solid Film Additives Lubricant Characteristics and Additives The most commonly used AW/EP additives are compounds formed from zinc, phosphorus, sulfur and/or calcium. Older additives may still include antimony, chlorine and/ or lead, but these are generally considered to be health and safety concerns. AW/EP additives require specific temperatures so as to react with the metal surface (Figure 32). This is not the temperature of the bulk oil, but the localized temperature that is created when the asperities rub. Figure 32. Active temperature range of various AW/EP substances compared to mineral oil and ester. 200 300 400 500 600 700 800 900 1000 1100 1200 0 0,5 0,4 0,3 0,2 0,1 Temperature °C Friction coefficient Mineral oil Cl + P + S + Fatty esters Fatty esters Cl P S Under hydrodynamic lubrication conditions, the metal surfaces do not touch; therefore, AW and EP additives are not reactive and remain undisturbed in the oil. In mixed-film and boundary lubrication conditions, heat and load from metal contact removes the natural oxide layer and causes the additives to react with the metal surface (Figure 33). The additives sacrifice themselves to provide a protective layer that prevents wear. Figure 33. EP/AW additives will react with the metal surface as asperities interact in mixed-film and boundary conditions. Soluble EP / AW Additives Natural Oxide Layer Solid lubricants can provide additional protection from wear by imparting a non-reactive, protective layer to the metal surface. This layer is applied physically as the surfaces rub and is non-sacrificial (Figure 34). Figure 34. Solid lubricants will work onto the surface physically to provide protection and can be complementary to EP/AW additives. Common solid lubricants include: • Molybdenum Disulfide (Moly) • Graphite • PTFE • Talc • Mica Moly is used extensively to provide extra EP protection to oils and greases, especially in heavily loaded, shock-loaded, and high-sliding applications. The structure of the molecule and the way it works is illustrated in Figure 35. Figure 35. The MoS2 structure of Molybdenum Disulfide allows for extremely high load-carrying capability in the perpendicular direction (250,000 psi), while shearing easily in the parallel direction to provide very low coefficient of friction to moving parts. Mo Mo Mo Mo Mo S S S S S S S S Mo Mo Mo Mo Mo S S S S S S S S Extremely high load carrying capacity in this direction (250,000 psi) Sulfide layers shear easily in this direction to produce low coefficient of friction R19

