Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 330 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Hydraulics Fire-Resistant Hydraulic Fluids • Most common aqueous FR fluid • Typically about 40% water • True solution (not an emulsion) • Relatively low maintenance • Oil-in-water emulsion • Generally 95% water and 5% oil/additives • High maintenance • Poor lubrication • Water-in-oil emulsion • Typically about 40% water • High maintenance High water based fluids (HWBF) and invert emulsions are used rarely; in most cases, they have been replaced by water glycols due to lower maintenance and better lubrication properties. Water glycols are made up of: Water glycols usually contain diethylene glycol and a vapor-phase rust inhibitor to provide corrosion resistance to components above the fluid line. They are typically red or pink in color to distinguish them from other fluids and should be monitored routinely for water content, rust inhibitor level and other key properties. Diethylene Glycol Water Rust Inhibitor & Other Additives ~ 40% Due to the potential for evaporation, water monitoring is important to ensure that fire-resistant qualities are not lost over time. Water is determined by either viscosity or refractive index using a refractometer. • Viscosity testing in a laboratory is the best method, but a handheld refractometer can be used on-site for more frequent monitoring or faster data collection. • For each 1% loss of water, the viscosity of the water glycol will increase by about 8 SUS. Treated water such as deionized water should be added back to replenish lost water. Rust inhibitor is recommended to be added back at the same time as water, as it should be assumed to be lost at a similar rate as the water. Water glycols are typically ISO 46 (~200 SUS) fluids that have limited pressure and pump life ratings due to their reduced lubrication qualities when compared to mineral oils. They may also have different seal compatibility, which should be investigated prior to use. • Most common non-aqueous FR fluid • Excellent lubrication properties • Typically biodegradable • Good compatibility with mineral oil • Self-extinguishing properties • Premium seals required • Forms strong acids quickly • Dense black smoke when burned • Natural plant-based materials • Excellent lubrication properties • Poor oxidation life • High tendency to sludge and varnish Phosphate ester fluids have mostly been replaced by polyol esters due to their reduced maintenance requirements and overall lower costs. Vegetable oils have gained in popularity, but are still used infrequently. Non-Aqueous Phosphate Ester Polyol Ester Vegetable Oil Aqueous Water Glycol High Water Based Fluids (HWBF) Invert Emulsion R44

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES