Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 332 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Hydraulics Filtration and Contamination Control Pump Dirty Transfer Container Open Port/Poor Breather During Maintenance > Cylinder/valve repair > Hose replacement Cylinder Rod Internally Generated from pump & valves New Oil Figure 13. Contaminant ingress points in a hydraulic system. Maintenance repairs and other activities should be performed in an appropriate manner to minimize contamination of the system. Solid Contamination For the purposes of this section, we will focus primarily on solid contamination, which leads to abrasive wear of metal components and seals and causes sticking of valves and actuators. Figure 14 shows an example of how small micron particles can affect a valve by getting between the internal clearances (typically 1-8 micron). Figure 14. Small particles, invisible to the naked eye, can have great effects on valve operation. P T A B T These miniscule particles are generally not visible to the human eye, which has a limit of about 40 micron (Figure 15). They prevent proper movement of the spool within the valve, leading to sticking, erratic operation and abrasive wear. Figure 15. Micron sizes of various objects. The human eye can't see the tiny particulate (<40 micron) in hydraulic oil that can create big problems. 10 20 30 40 50 60 70 80 90 100 0 POLLEN HUMAN HAIR GRAIN OF SALT microns . Limitation of Human Eye Particle Counting Since the solid contamination that causes problems can't be seen visually in the oil sample, laboratory techniques have been developed to measure the size and volume of these particles. The primary means for testing solid contamination is via a laser particle counter (Figure 16), which counts the number of particles per mL in a range of micron sizes. • A high-intensity laser is used to illuminate the particle as it passes through the detection chamber. • A photo detector measures the amount of light blocked by the particle to determine its size. Figure 16. Laser particle counter uses a photo diode to detect the particle size based on the amount of light blocked. R46

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES