Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Hydraulics Figure 17. ISO scale numbers based on number of particles per mL in three different micron sizes. Filtration and Contamination Control Particle size and volume per mL is classified into a simplified code for reporting purposes using ISO 4406 standard. The three-digit scaled code corresponds to the number of particles: >4 micron / >6 micron / > 14 micron. The scale number represents a range of particle volume as shown in Figure 17. In this example, a particle count of 20/17/13 indicates the sample had: • 5,000-10,000 particles per mL greater than 4 micron, • 640-1,300 particles per mL greater than 6 micron, and • 40-80 particles per mL greater than 14 micron. Many studies have shown that contamination is a major reason for hydraulic component failure; in turn, equipment life can be greatly extended by reducing solid contamination. As shown in the example in Figure 18, improving cleanliness from 23/21/18 to 18/16/13 can increase the life of hydraulic components by four times. Figure 18. Life extension of equipment through reduction in solid contamination (particle count). 5X 4X 3X 2X Life Ext. Factor 14/12/8 14/12/9 15/13/10 16/14/11 19/17/14 14/12/9 15/13/10 16/14/11 17/15/12 20/18/15 15/13/10 16/14/11 17/15/12 18/16/13 21/19/16 16/14/11 17/15/12 18/16/13 19/17/14 22/20/17 17/15/12 18/16/13 19/17/14 20/18/15 23/21/18 18/16/13 19/17/14 20/18/15 21/19/16 24/22/19 Target Target Target Target Current Cleanliness Setting and Achieving Particle Count Targets Particle count targets for a particular system should be set based on the most sensitive component within the system and the overall system pressure. For example (see Figure 19), a hydraulic system at 2500 psi with variable vane pump, servo valve and cylinder should have a particle count target of 16/14/11, dictated by the needs of the servo valve (highly sensitive to contamination). Figure 19. Particle count targets based on system pressure and individual component. Courtesy of Eaton-Vickers contamination control book. Laser particle counter measures the # of particles in various size ranges which is converted to an ISO scale 20 / 17 / 13 >4µ >6µ >14µ R47

