Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Greases and Bearings Figure 6. Penetrometer used for measuring the consistency of grease. Figure 5. General guidelines for grease compatibility. Grease Thickeners Grease Compatibility Greases of different thickeners are not always compatible. This should be taken into consideration when converting from one grease to another. Whenever possible, grease mixing should be minimized by proper purging of delivery lines and bearings with the new grease. Where significant mixing is expected, compatibility testing should be conducted in the lab to determine expected mixing results. Figure 5 at right is a general guideline for thickener compatibilities, but it does not take possible base oil and additive incompatibilities into account and therefore should not take the place of proper lab testing. When incompatible, mixed greases tend to harden, soften and/or lose their high temperature properties. Hardening is of particular concern, especially in central lubrication systems where the grease would be difficult to remove. C Compatible B Borderline I Incompatible I I I C I B I I I C I C I I C I C I B I I I I I C I I C I C I C I I B I I B I I I I C I C C C B C I C I C C C C B B C C C C I C I I I I I B I I I I C C C I B B C C B I I B B C I C I I I I C C I I I I I I B I I I I C C I B I C C I C B I I B B C I B I C C I C I C I I C C C C I C C I C B I I I I I C I I I I I C I C C B C C C C B C C C C I I I I I I I I I B I B I I Aluminum Complex Barium Barium Complex Calcium Stearate Polyurea - shear stable Calcium 12-hydroxy Calcium Complex Clay (bentone, non-soap ) Lithium Stearate Calcium 12-hydroxy Calcium Complex Clay (bentone, non-soap) Sodium Aluminum Complex Barium Barium Complex Lithium 12-hydroxy Lithium Complex Polyurea - conventional Polyurea - shear stable Sodium Calcium Sulfonate Calcium Sulfonate Lithium Stearate Lithium 12-hydroxy Lithium Complex Polyurea - conventional Calcium Stearate Grease Characteristics The key grease characteristics discussed in this section include: • Consistency (NLGI grade) • Base oil viscosity • Dropping point • Water resistance • Load carrying ability (EP/AW) • Shear Stability/Roll Stability Consistency Consistency is the measurement of the hardness or stiffness of a grease. An instrument called a penetrometer is used to measure grease consistency (Figure 6). A weighted cone is dropped into a cup of grease (under controlled temperature) and the gauge measures the penetration distance in millimeters (mm). This penetration is typically converted into a scale code called the NLGI grade (Figure 7), which is used to describe and specify greases. This scale contains nine grades ranging from an NLGI 000 grease, which is extremely soft and pourable, to NLGI 6, which is solid and therefore often referred to "brick grease." R56

