Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Metalworking Technical Training Cutting and Grinding 1 800 255 4417 www.castrol.com/GPS March 2017 Metalworking Fluid Types Overview and comparison of the main metalworking fluids types: Fluid Type Description Benefits Limitations Appearance Neat Oils Also known as Straight Oils. Contain oil and additives, no water, and are not diluted. High lubrication, excellent rust protection, no bacteria concerns, long sump life Slip hazard, high carry-out, high in-use cost (not diluted) Clear to dark oil Soluble Oils Contain up to 80% oil with emulsifiers and other additives. Diluted with water to form an emulsion. Low price, versatile, good lubrication Higher carry-out than other water-based coolants, bacteria growth, short sump life Milky emulsion Semi-Synthetics Typically up to 50% oil with emulsifiers and synthetic components. Diluted with water to form an emulsion. Long sump life, excellent for many materials and operations, low carry-out Moderate to high price Translucent emulsion Synthetic Contain no oil. Utilize all synthetic, water soluble components to form a true solution. Extremely long sump life, excellent bio-resistance, high cleanliness, very low carry-out, excellent cooling, low foam. High price, lower corrosion protection, possible concerns with seal/plastic compatibility Transparent solution Water Quality Impurity Description Source Concerns Hardness Combination of ions in the water. Primarily calcium and magnesium but also iron, aluminum, zinc and other metals. Water hardness varies greatly by region. Minerals in the earth and work- piece materials Small amounts of hardness are good to reduce foam, but high levels lead to emulsion instability and corrosion. Dissolved Salts Chlorides and sulfates in the water. Minerals of the earth Chlorides increase corrosion potential. Sulfates promote bacterial growth. Dissolved salts continually build in the coolant system over time. Bacteria and Fungus Naturally occurring micro-organisms common as part of run-off in ground water. Naturally occurring or introduced through poor maintenance of water systems Provides a regular "feeding" source to the metalworking fluid, reducing sump life. Dissolved Gases Chlorine and sulfides. May be detected by smell in the water. Water treatment process, or water contaminated by chemicals such as acids or bleach May cause severe corrosion on the machine tools and covers. Water quality plays a large role in the overall function of a water-based metalworking fluid. Since water soluble coolants are typically used at 10% concentration and below, this means that 90% or more of the solution is water, making its quality of definite concern. Water can have a variety of impurities that are common among various municipality and well sources: Q8

