Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Metalworking Technical Training Cleaners 1 800 255 4417 www.castrol.com/GPS March 2017 Water Quality As previously discussed, cleaner performance is dependent in part on chemical energy. Water quality can impact the effectiveness of the cleaner's chemical energy. Tap water with low hardness levels is usually appropriate for most general cleaning. Hardness components found in most ground water usually consist of calcium and magnesium ions; additional water contaminants include chlorides or sulfates as well as bacteria and fungus. Water with higher levels of these hardness ions and contaminants will tend to "tie up" elements of the cleaner chemistry, thus rendering it less effective. • Municipal water supplies are treated for bacteria and other organisms, but can vary widely in hardness and other mineral contaminants. These ionic components react with cleaner chemistry, thus either reducing the effectiveness of the cleaning process or shortening the effective life of the cleaner. • Hardness-related sludge and residues can form, as can deposits that leave spots on workpieces. • High chloride levels will reduce the effectiveness of the cleaner's rust protection, and excessively high levels will cause rust or stains. • Hardness levels will build over time as make-up water is added to the system, since the hardness components do not evaporate. Recommended actions to eliminate water-quality issues for effective use of cleaner products are: • Test plant water for water quality. • If hardness is high, consider using treated water for makeup of wash and rinse stages of parts washing. • Reverse Osmosis (RO) or deionized water (DI) are the most appropriate treatments. • Softened water (which uses salt) can cause high chloride levels and should be avoided. If water quality improvement is not an immediate option, choose a cleaner formula with chelator or sequestering chemistry to mitigate the impact of the hardness ions. Hardness Level Grains per gallon (gpg) Parts per million (ppm) Soft 0-3 0-50 Medium 3-7 50-120 Moderately hard 7-10 120-170 Hard 10-15 170-250 Very hard 15+ 250+ gpg x 17.1 = ppm Figure 13. Water hardness levels. Control and Care of Cleaners Solvent Cleaners The care of solvent cleaners is relatively simple. Checking for solids is the most appropriate action, including analyzing for particulate contamination and checking for water contamination and soluble hydrocarbons such as oils. The solids test will evaporate the volatile solvent components and leave behind the longer chain hydrocarbon soils. High solids would indicate the need for exchange of the solvent for fresh or recycled solvent (e.g., distillation, done usually by a solvent supply and recycling service provider or high-tech washer designed for such). Aqueous Cleaners Alkaline aqueous cleaners can be monitored and effectively controlled to maximize their useful life. As cleaner products are removing various types of soils, they are constantly being contaminated. The best action is to frequently sample and analyze the wash fluid to determine concentration and contaminant levels. Q33

