Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 271 of 385

Technical Training and Reference Info Metalworking Technical Training Cleaners 1 800 255 4417 www.castrol.com/GPS March 2017 Control and Care of Cleaners How Often to Check Depending on the production levels and the volume of the washer reservoir, daily checks may be necessary. Many customers can do spot checks every other day or twice weekly, with a weekly full analysis routine. In extreme cases (such as washers with very small reservoirs), checks at the beginning of each shift may be necessary to avoid partially washed or rusty parts. Nearly all industrial process washers have automatic makeup of water to ensure that the reservoirs do not become too low in operating level (which can cause heater element damage if allowed to do so). Washers with auto-makeup often will have alarms to alert operators to correct malfunctions of the water delivery controls. How to Check Refractometer Most users of industrial cleaners are aware of the value of optical refractometers, as these are often used to monitor the concentration of metal removal fluids. Convenient to use, they can be helpful to determine quickly whether the initial charge of a washer is at the correct concentration. Figure 14. Handheld optical refractometer, which may be useful to measure starting concentration of a cleaner but should not be used to measure contaminated fluid. As convenient as this type of instrument is to use, an optical refractometer should not be relied upon for control after a washer has been in service. The soils being removed (such as oils and coolant residues) often commingle with the cleaner chemistry and will skew the refractometer reading. As a result, a refractometer will show results of the cleaner plus the soil contamination. As the interval between washer dumps and recharges is extended, the more error will be found in a refractometer reading. Used cleaner concentration is best determined using an alkalinity measurement. Alkalinity Titration An alkalinity titration is the most reliable method for monitoring and controlling cleaner concentration. Two methods are readily available to determine concentration by this method: field kits and laboratory titration. Field kits (commonly referred to as Hach kits) • Convenient for field use or at sites without laboratory facilities • Contains sampling vessel, titration acid with dropper, color indicator pillows, etc. • Drops of acid are counted until the color change occurs within the sample being analyzed • The number of drops is converted to a concentration result by consulting a previously prepared conversion chart or using an alkalinity factor for the cleaner being tested Figure 15. Field alkalinity test kit with components. Courtesy of Hach. Q34

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES