Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 275 of 385

Corrosion Preventives Technical Training and Reference Info Metalworking Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Basics of Corrosion We usually know what corrosion is when we see it. For example: • Red rust on ferrous parts. • White or grey spots on aluminum pieces. • Pitted surfaces on a once smooth piece of metal. What has happened? We will explore that and discuss options to prevent corrosion. Corrosion Process • Corrosion is the reaction of a metal surface with its environment • Corrosion is nature's way of returning metal to its original state • Corrosion causes loss of metal (pitting) • Corrosion is an electrochemical reaction between: — Metal — Water — Oxygen • All three elements must be present to produce corrosion Chemically, freshly machined metal surfaces are very active, with many freshly exposed ions able to react and lower to a more stable energy state. So, without a corrosion inhibitor of some sort, corrosion can easily occur if all three of the required elements (metal, water and oxygen) are available. Causes of Corrosion • Humidity changes (especially if the workpiece drops below the dew point) • Corrosive environments — Acid atmosphere — Alkaline atmosphere — Dissolved metals, salts, and ions (calcium, chlorides, sulfates, iron, etc.) • Moisture trapped between surfaces • Dissimilar metals in contact • Metal fines deposited on part surfaces (poor cleaning) Corrosion inhibitors act by interfering with/preventing one of the three elements (metal, water or oxygen) from reacting. Hydrophobic polar compounds in a corrosion preventive form a barrier, which keeps water from getting to the metal surface and completing the corrosion circuit. Figure 1. Examples of corrosion on metal surfaces. Q38

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES