Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Fundamentals of Lubrication Tribology and Friction Rolling Friction Rolling Friction is the force that resists rolling motion. Ball and roller bearings are good examples of rolling friction, as are many gear types (rolling at the pitch line). As shown in Figure 9, the applied force must be greater than the frictional force in order to "get the ball rolling." Figure 9. The mechanism of rolling friction. The applied force must be higher than the friction to move the ball. applied force frictional force Clearly, rolling friction is much lower than sliding friction, which is why balls or rollers are used in bearings to achieve smooth rotary motion. But even with this lower friction, metal-to-metal contact can be very detrimental in bearings, so good lubrication is required for long life and efficient operation. Rolling wear particles are distinct from sliding wear particles, appearing as "pitting" on the metal surface and in a round or spherical shape under magnification (Figure 10). Figure 10. Surface loss from rolling wear shown as a pit (left) and typical particle shape (right). It is important to understand the difference between a "Lubricant" and "Lubrication." A lubricant is a substance that helps control friction and wear. Lubrication is the science of reducing friction by the application of a suitable substance between the rubbing surfaces of bodies having relative motion. In many cases, you can have a "lubrication" problem that may not be associated with the "lubricant" at all. The Lubrication Rule shows that the correct lubricant is only one piece of the lubrication puzzle. Improper lubrication may mean any of the following: • Too much or too little lubricant is being used • The wrong lubricant type, wrong viscosity or a poor-quality lubricant is being used • The lubricant is not getting to the correct surfaces • The lubricant is not getting there at the right time, e.g., the lubrication frequency is incorrect Lubrication Lubrication Rule The Right Amount of The Right Lbricant in The Right Place at The Right Time R4

