Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Fundamentals of Lubrication Lubrication Functions of a Lubricant Lubricants serve a variety of functions to help the overall performance of the equipment. They do this by forming a thin layer between the work surfaces so as to prevent their contact with each other. The main purposes of lubrication are: 1. Reduce Friction Energy losses are proportional to the amount of friction encountered. By reducing friction, you reduce energy required to perform work. Studies have shown that overcoming frictional forces accounts for 30% of all energy consumed. 2. Control Wear WEAR = the removal or transfer of material. By reducing wear, equipment life is extended and the quality of production is maintained for a longer period of time. Wear exists in many forms: WEAR Erosive Wear Abrasive Wear Corrosive Wear Fatigue Fretting Adhesive Wear 3. Prevent Corrosion Stopping corrosion can eliminate premature failures of equipment, especially those due to a loss of critical tolerances or accelerated abrasive wear. Many types of corrosion exist: Corrosion Acidic Rust Basic Static Other Fretting 4. Cool Surfaces/Carry Away Heat Cooling helps to maintain working tolerances and extend oil life. It also reduces the chance for catastrophic wear and allows equipment to be run at higher loads and faster speeds. 5. Seal Out/Carry Away Contaminants Greases work well to seal out contaminants. Oils work well to carry away contaminants so they can be settled or filtered out. Reducing contamination lowers the amount of abrasive wear within a component and increases the lubricant and equipment service life. Contamination in the form of liquid or solid will be a catalyst for oxidation of the oil and will reduce the lubricant life. Contamination Damage 6. Dampen Shock The oil film must remain intact during load changes to prevent metal-to-metal contact. By acting as a "cushion," the high loads imposed by shock-loading conditions can be reduced, thus extending equipment life. Vibration and noise are also reduced. Force (F) Coefficient of friction (μ) F W = Weight (F) R5

