Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Fundamentals of Lubrication Base Oil Types Lubricants are made up of base oils, which are typically 90+% of the final formulation, and additives (which will be discussed in the next section). Finished Lubricant = Base Oil + Additives Mineral Base Oils Most lubricants use mineral (petroleum) base oils developed by refining naturally occurring crude oil. Crude oil is a mixture of many hydrocarbons with the composition dependent on the source and location of the crude. It varies by viscosity, color, odor and chemical make-up. All are some degree of mixtures of paraffinic, naphthenic, aromatics and asphalt, but most crude oils will contain a higher concentration of one of these components. Refining Process • As crude oil comes out of the ground, it consists of complex compounds of hydrocarbons and impurities. The refining process removes the impurities and separates the various fractions from the crude oil. This primary separation takes place in distillation towers (Figure 14). • As the crude oil is heated, the lighter (lower boiling point) components will rise to the top, whereas the heaviest ones will remain in the bottom of the tower. Figure 14. Distillation of crude oil to various hydrocarbon products. Image © 2001 How Stuff Works. This base oil is further refined to improve its quality. The American Petroleum Institute (API) has categorized base oils into five main categories (Figure 16). Groups I, II and III are petroleum-refined paraffinic base stocks; group IV is synthetic PAO; and group V is for all other base oils that do not fit into one of the other categories. Figure 15. What's in a barrel of crude oil? Crude oil products include asphalt, very heavy base oils, engine base oils, industrial base oils, kerosene, diesel fuel, gasoline and jet fuels. A typical barrel of crude oil (42 US gallons) contains less than 3% lubricating base oil, as a majority of it ends up as fuels (Figure 15). Lubricants <3% Asphalt 5% Kerosene 1% Jet Fuel 6% Natural Gas 14% Industrial Fuel 16% Diesel 18% Gasoline 39% 42 US Gal = 1 Barrel Category Description Group I Solvent refined mineral oil Group II Hydro-processed mineral oil Group III Hydro-cracked / isomerized mineral oil Group IV All Polyalphaolefins (PAOs) Group V Anything Not Covered in Groups I - IV API Base Oil Classifications Figure 16. American Petroleum Institute (API) base oil designations. R10

