Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 301 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Fundamentals of Lubrication Lubricant Characteristics and Additives Other classification systems as shown in Figure 25 include AGMA, which is related to the gear industry; SAE, which is related to the automotive industry; and SUS, which is an older system previously used for industrial oils (and is still referenced for older equipment). CLASSIFICATION DESCRIPTION EXAMPLE ISO International Organization for Standardization Most common system for industrial oils. ISO 46 hydraulic oil AGMA American Gear Manufacturers Association Sometimes used to describe gear oil viscosity. AGMA 6 EP gear oil SAE Society of Automotive Engineers Measurement system for automotive engine and drivetrain oils. SAE 5W-30 motor oil SUS (or SSU) Saybolt Universal Seconds Industrial viscosity classification system sometimes referenced on older equipment. 500 SUS circulating oil Not all viscosity systems can be directly converted to each other, since they each have their own requirements and ranges. However, general comparisons can be made using the viscosity chart (Figure 26). Figure 26. Chart comparing the different oil classifications and their equivalents. Approximate equivalents should be read horizontally. Note: Chart assumes a viscosity index of 95. Figure 25. Lubricant Classification Systems R15

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES