Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 316 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Gears Open Gear Lubricant Classifications and Requirements Several industry-wide specifications and standards have been developed for open gear lubricants by the AGMA and different original equipment manufacturers (OEMs). Open gearing applications, particularly those associated with ball mill and finishing mill applications, are considered some of the most difficult applications a lubricant can encounter. Generally, these types of open gears operate at low pitch line velocities and under heavy loads. In addition, more recent designs of equipment require open gearing to transmit increasingly higher loads. Because of these considerations, an open gear lubricant must possess the following characteristics and properties: • High load-carrying capability to protect against friction and wear • Ability to be sprayed and drained for ease of removal from roots and guards • Tackiness for adhesion to the gears and resistance to fling-off • Resistance to water and protection against corrosion • Alleviation of housekeeping and maintenance Types of Open Gear Lubricants Open gear lubricants can be divided into several classes: • Asphaltic type • Semi-fluid greases • High-viscosity synthetics Each class has its own set of requirements and is intended to provide the appropriate performance for each application. Asphaltic Type (Residual Compounds): Formulated from high viscosity mineral oils or residual compounds that contain a high level of asphalt and a volatile solvent to aid in lubricant delivery • Once applied to the gears, the meshing action causes the solvent to flash or evaporate, leaving behind a viscous coating of lubricant (Figure 7). • Typically, the residual oil's viscosity is extremely high (643 cSt or higher at 100º C). • At high temperature, asphaltic type gear lubricants become less viscous and adhesive, resulting in housekeeping problems and higher lubricant consumption rates. • At low temperatures, they have a tendency to build up in the root zone and be very difficult to pump and dispense. Figure 7. Typical appearance of a pinion lubricated with residual compound; Castrol Alpha OGL-W is shown here. Semi-Fluid Greases: Contain medium-to-high viscosity petroleum or synthetic base oils that are thickened with a traditional grease thickener or gel-type polymeric compound to a typical consistency of NLGI 00 to 0 • EP agents and solid lubricants are added to enhance their thin film and boundary film performance. • Gears can often be easily observed during inspections when using a strobe light while the equipment is operating. • Unlike asphaltic types, semi-fluid greases will not build up in the root zones of the gearing. • Semi-fluids offer good-to-excellent pumpability characteristics and reduced consumption over asphaltic type open gear compounds. • Gear temperatures may be reduced by as much as 30º F over conventional lubricants. Figure 8. Typical appearance of a pinion lubricated with semi-fluid grease compound; Castrol Molub-Alloy OG 8031/3000-00 is shown here. R30

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES