Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 315 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Gears Gear Classifications and Lubrication Requirements Compounded Gear Oils (CP) Compounded gear oils are a blend of petroleum base oils with 3% to 10% of natural or synthetic fatty oils. These lubricants are frequently used in worm gear drives to reduce the friction associated with the high sliding action of the gearing. AGMA has set minimum performance requirements for each class of lubricant. These include the following measures: • Viscosity @ 40° C, mm2/s • Viscosity index, min. • Flash point, ° C, min. • Pour point • Oxidation resistance • Foam suppression • Water separation • Rust prevention • Copper corrosion • FZG scuffing test (Anti-scuff oils only) • FE-8 Bearing test (Anti-scuff oils only) • Fatty content (Compounded oils only) Typically, lubricant suppliers will formulate their gear oils to meet the requirements of this AGMA specification. Gear Oil Viscosity Selection As noted above, viscosity is the most important property of any lubricant. Selection of the gear oil viscosity grade is based on: • OEM recommendations/rigorous testing (this is the primary means through which to choose viscosity) • Gear type — Enclosed — Open — Spur — Helical — Bevel — Hypoid — Worm • Anticipated bulk oil operating temperature • Oil viscosity index (VI) • Bearing requirements — Consideration should be given to the viscosity requirements of the bearings when they are lubricated with the gear oil • Pitch line velocity — In the case of multiple reduction gear drives, the pitch line velocity for the lowest speed mesh should be considered Pitch line velocity is the linear speed of the gear at the pitch line. It can be calculated as follows: Pitch line velocity (m/s) = (Pitch Diameter in mm X RPM) ÷ 19098 (Note: this velocity will be the same for 2 meshing gears) Example: Pitch Diameter RPM Pitch Line Velocity 12" (304.8 mm) 500 8 m/s 12" (304.8 mm) 1000 16 m/s 18" (457.2 mm) 500 12 m/s In the absence of OEM specifications and rigorous testing, the AGMA 9005 standard contains detailed tables to assist determination of proper viscosity. To select the viscosity grade of the gear oil, determine the pitch line velocity (m/s) of all gear sets and expected oil temperature. Select viscosity grade for the most critical gear set, taking cold start-up conditions into account. • The AGMA tables provide estimates of the appropriate viscosity grade (VG) based on both operating speed and temperature. • Tables are also available for worm gears, as they have different requirements than other gear types (e.g., spur, helical, and bevel) do. R29

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES