Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Gears Gear Classifications and Lubrication Requirements There can be many factors to consider when selecting a gear oil. The most important of these is the viscosity: Type of gears • Enclosed gears typically use an oil • Open gears often use special grease-like compounds • Worm gears have high sliding friction and require different oils than other types Type of load • Light uniform loads do not require high EP lubricants • Heavy and/or shock loads will require EP and/or solids lubricants • Slow speeds require high viscosity oil • High speeds require low viscosity oil Operating temperature • Low temperature will require gear oils with low pour points and open gear compounds that will pump well • High temperature will require a fluid with a high VI and/or higher starting viscosity OEM specs • Manufacturers perform testing on their equipment, so their recommendations should always be followed (or, at a minimum, these should serve as the starting point) • If conditions fall outside of OEM specs, consult a lubrication professional for proper oil recommendation Materials of construction • Check to ensure that the metals, seals, paint, etc. that are present throughout the system are compatible with the lubricant Environmental • Concerns may require a biodegradable or heavy metal-free lubricant Gear Lubricant Types The American Gear Manufacturers Association (AGMA) 9005 standard for gear oils provides the end user, original equipment builder, gear manufacturer and lubricant supplier with guidelines for minimum performance characteristics for lubricants suitable for use in general power transmission applications. These guidelines cover both open and enclosed gearing that has been designed and rated in accordance with applicable AGMA standards. AGMA oil classifications include: • Inhibited (R&O) – not frequently used in industrial applications • Anti-Scuff (EP) – contain chemically active and/or solid film EP additives • Compounded (CP) – contain fatty compound for better wetting and lubricity in high sliding applications such as worm gears Each class has its own set of requirements and is intended to provide the correct performance for each application. R&O Inhibited Oils These oils are commonly referred to as rust and oxidation inhibited, or R&O lubricants. They are formulated with highly refined petroleum or synthetic base oils and contain additives that enhance oxidation stability, provide corrosion protection and suppress foam. While their superior oxidation stability sets them apart from other gear oil types, their load-carrying capabilities are lower. These oils are generally associated with higher speed and lighter load applications and are not frequently used in industrial gear applications. Anti-Scuff/Extreme Pressure (EP) Oils In addition to offering protection against corrosion and oxidation, these oils contain additives that provide protection against unacceptable wear and scuffing. They are formulated with refined petroleum or synthetic base oils and are generally used in ISO VGs of 150 and above. EP oils were developed to protect geared systems operating at high loads and under severe impact or reversal conditions. These are the most common oils recommended for industrial gear drive applications. R28

