Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Gears Gear Classifications and Lubrication Requirements There are two types of gear drives: 1. Enclosed gears and 2. Open gears. Open gears are also divided into two types: • Type 1 Open Gear Drives: Consist of an actuator and a rack system used to transmit power non-continuously (e.g., in an oscillating motion). Often called a rack and pinion. • Type 2 Open Gear Drives: Consist of an actuator, pinion and a gear or a series of connecting gears used to transmit continuous loads (non-oscillating) Lubrication requirements for open gears differ from those of enclosed gears. Special characteristics of open gears include the following: • Open gears may have an enclosure around them, but they are generally "open" to the atmosphere. Typically,the only open gear types used are spur, helical or herringbone. • Open gears are usually large in size, slow in speed and heavily loaded. Due to their heavy loading and slow speeds, open gears require heavier and tackier compounds to cling to and protect the gears. • Open gear lubes often have solid additives for greater gear protection. • Spray systems are much more common than sumps. In addition, pumpability can be a major consideration with open gears due to the heavy nature of the lubricants and higher potential for outdoor applications. Selecting a Gear Lubricant Typically, the primary focus when considering gear lubrication is on protecting the gears. But in addition to the gears themselves, there are many other components that must be served by the fluid in the gearbox. Consideration should be given to the bearings, seals and other auxiliary equipment such as pumps and heat exchangers. Each of these may be affected by the choice of lubricant. With most open gear drives, the bearings are lubricated independently of the gears, thus allowing for specific lubricant requirements to be met. However, many enclosed gear drives utilize a single lubricant source for supply of not only the gears, but also the bearings, seals, pumps and more. As a result, selecting the correct lubricant for a gear drive system includes addressing the lubrication needs of not only the gears, but all other associated components in the system. When selecting a gear lubricant, it is important to consider the options shown in Figure 6. Manufacturers Recommendations Environment Materials compatibility Load and Speed g n i t a r e p O Temperature Type of Gears Enclosed or open gears? Spur, helical, bevel, hypoid or worm? Type of the load: uniform or shock ? Light, moderate or heavy? RPM? Does the temperature vary greatly ? Is the system very hot ? Any OEM specific recommendations? What is the viscosity requirements ? Do any component materials restrict the choice of Gear Lubricant ? Any special considerations because of the location of the system ? Figure 6. Main factors in selecting a gear lubricant R27

