Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Hydraulics Hydraulic System Components In variable displacement inline axial piston pumps, the swashplate angle can be varied to reduce flow corresponding to the given angle (i.e., an angle of 0˚ produces no flow). The overall output volume is thereby determined by the driveshaft speed (RPM), piston displacement volume and swashplate angle. Vane Pumps Vane pumps consist of a slotted rotor, polished vanes and an elliptical-shaped cam ring within the pump housing (Figure 4). The vanes can move freely within the rotor and are pressed against the cam ring due to centrifugal force from the rotation of the rotor. Fluid is moved via these actions: 1) Fluid is drawn in through the inlet ports, 2) Fluid is compressed as the volume decreases within the elliptical cam ring, and 3) The compressed fluid is discharged via the outlet ports to the system. The efficiency of vane pumps remains relatively constant over the life of the pump, since the vanes will continue to advance out of the slots as the ends wear. Figure 4. Vane pump. INLET OUTLET Rotor Vane Cam Ring Gear Pumps Gear Pumps have two main types – external and internal – with external gear pumps being the most common (Figure 5). External gear pumps consist of two intermeshing gears enclosed within a housing, with one gear being driven by the motor and the other driven by the rotating gear. Fluid is trapped between the gear teeth and housing walls as the gears rotate in opposite directions. Since the fluid cannot flow through the cen- ter of the mesh, it is forced out through the discharge port. Internal gear pumps (Figure 6) use a gear-within-a-gear design to trap fluid and force it to the outlet. Gear pumps have the advantage of simple design, low expense and high tolerance to dirt, but generally have limited pressure capabilities. Figure 5. External gear pump. Figure 6. Internal gear pump. R39

