Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 368 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Compressors Types of Compressors Centrifugal Compressors Centrifugal compressors, also known as radial compressors, are designed to supply a large volume of air at relatively low pressure. Centrifugal compressors consist of an impeller and diffuser section (Figure 5). Gas enters the impeller wheel through a large inlet; the impeller is designed to impart velocity to the gas. As the high- velocity gas passes the diffuser section, the pressure of the gas increases while its velocity decreases, thus compressing the gas. The compressed gas exits through the outlet port, which is placed tangentially. • Centrifugal compressors are used throughout industry because they have fewer rubbing parts, deliver oil- free air, are relatively energy efficient and give higher airflow rates than similarly sized positive displacement compressors. • Their primary drawback is that they cannot achieve the same level of pressure as other types of compressors. A centrifugal compressor is designed to be oil-free in the air stream. Oil lubricates only the support bearings and, possibly, the speed increaser gears. Typically, centrifugal compressors require high-quality ISO 32 tur- bine mineral oil or semi-synthetic oil. Compressor Oils The main functions of a compressor oil are to: • Reduce friction and wear of lubricated components • Improve sealing of pressurized spaces • Provide cooling • Impart corrosion resistance To provide long oil and compressor life, compressor oil should have high oxidation resistance, especially for rotary screw, rotary vane and reciprocating cylinder applications. Anti-wear additives are also useful for some applications – such as rotary vane compressors – so as to reduce wear under high metal-to-metal contact. Types of Compressor Oils The base oil selection for compressor oils is important, as the base oil imparts many of the final characteristics to the product. The primary types of base oils used to formulate compressor oils include: • Mineral Oils • Synthetic PAO • Synthetic Ester • Synthetic PAG Mixing of these base oils to achieve certain benefits is also common. For example, mineral oils may be mixed with synthetics to create a semi-synthetic that aims to deliver performance similar to full synthetic but at a lower cost. Also, it is common to mix PAO with ester to provide higher additive solubility and better residue characteristics. Mineral Oils Mineral oils of both paraffinic and naphthenic base may be used in compressors. By nature, paraffinic mineral oils have better viscosity index and oxidation resistance, but they also have a higher tendency to produce carbonaceous residues at high temperature than naphthenic base oils do. Overall advantages: Low cost, readily available, good compatibility with seals Overall disadvantages: Low oxidation resistance compared to synthetics, high carbon residues (paraffinic), low to moderate viscosity index Figure 5. Centrifugal compressor. Courtesy of Compressor Pro. R82

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES