For more than 30 years, Arbor Age magazine has been covering new and innovative products, services, technology and research vital to tree care companies, municipal arborists and utility right-of-way maintenance companies
Issue link: https://read.dmtmag.com/i/107856
FLEET MANAGEMENT You Can't Escape Technology:Take Advantage of It By Robert "Bob" Johnson R egulatory requirements governing fuel economy,emissions and safety have turned today's work trucks into rolling computers.At the same time, pressure to reduce operating costs has led manufacturers to add even more electronics to vehicles and truck equipment to improve operational efficiency.The net impact of these technological advancements is that fleet managers need to re-think every aspect of how they design, maintain and manage their fleets. allow fleets to limit idling time, reduce rolling resistance, improve vehicle aerodynamics and reduce vehicle weight — all of which will improve a fleet's fuel economy and may reduce maintenance costs. [ ] Embedded technology and beyond Much of the technology that fleet managers are exposed to on a daily basis is embedded in the vehicles and equipment that they purchase. This technology offers numerous opportunities to improve the way work trucks are designed and managed. For example, data that can be retrieved from vehicle powertrain control modules (PCMs) can be useful both in vehicle maintenance and in helping fleet managers design better, more efficient replacement vehicles. By adding telematics to vehicles, fleet managers can get real-time or near-real-time information on how their trucks are performing, and can use that information to define individual vehicle drive cycles. The GPS tracking and geo-fencing features associated with telematics systems can be used to improve the operational efficiency of a fleet and to reduce fuel consumption, both of which directly help the bottom line.Telematics systems can also be used to influence driver behavior. Other available technologies, both electronic and mechanical, may Vehicle upfitting The productivity of a work truck is directly tied to the way it is designed and built. In many cases, truck equipment and component manufacturers now find it advantageous,if not necessary,to interface their products with the truck chassis.In the process, they can often provide features and capabilities that were prohibitively expensive, or even impossible, in the past. Likewise, truck equipment upfitters are discovering that OEM components and system capabilities, which are often accessed through the vehicle's multiplex wiring system, can help them upfit a vehicle more efficiently.The knowledgeable fleet manager leverages these capabilities when specifying new work trucks to both reduce upfitting costs and to improve vehicle productivity. Most chassis manufacturers offer multiple upfitter component packages. One popular example is pre-installed switch packages in the dashboard that can be programmed to provide specific functionalities.This eliminates the need for the upfitter to work under the dash of a truck or to cut into the vehicle wiring system. Remember that upfitter package availability and multiplexing capabilities vary between manufacturers, and from model to model. Fleet managers need to be knowledgeable of these variations and should evaluate the impact the variations may have on final upfitting costs. Much of the technology that fleet managers are exposed to on a daily basis is embedded in the vehicles and equipment that they purchase. Photo provided by Telogis Technology is changing the way fleet managers manage their fleets. For example, Telogis Progression offers real-time job creation, tracking (including estimated time of arrival and completion), routing (including preplanned routes and dynamic changes throughout the day), dispatching, customer service notifications, route compliance reporting, job completion reporting, real-time traffic conditions and a rich interface to existing ERP systems. 22 Arbor Age / January/February 2013 In the maintenance shop Technology makes it possible to track every replacement part that goes into a vehicle; a vehicle's mileage and/or number of operating hours accumulated between failures;vendor part numbers for replacement parts; and very accurate maintenance labor costs.This data gives fleet managers the ability to: • Accurately track failures by vehicle make and model. • Track failures by both application and operating environment. • Determine the mean time between failures for various components, tracked by vendor, part number and operational conditions. • Optimize replacement parts inventory. • Establish an accurate predictive maintenance program. • Easily and accurately track maintenance costs by specific vehicle, make and model. This information can then be used to further optimize vehicle specifications and make better purchasing decisions for chassis,vehicle-mounted equipment and replacement parts. www.arborage.com