Issue link: https://read.dmtmag.com/i/133589
A/C CHARGE: X2 Dual Charger Dual Xtreme Charge® X2 Dual-Station Pulse Maintenance Charger • Charges and maintains two separate 12-volt lead-acid batteries • Works on 24-volt systems of two 12volt batteries connected in series The X2 Dual-Station Pulse Maintenance Charger doubles the charging capability and versatility of a standard charger. The dual-station capability of the X2 separately monitors, charges and maintains two 12-volt lead-acid VRLA, AGM or flooded batteries with one ac outlet. It is fully automatic, microprocessor-controlled and cannot overheat, spark or overcharge the connected batteries. With both consumer and commercial applications, versatility is also doubled. Consumers have several pieces of equipment with batteries that need to be in ready condition—such as automobiles, light trucks, boats, motorcycles, lawn tractors and ATVs. In addition, this unique charger can be used on 24-volt commercial systems composed of two 12-volt batteries connected in series—like generators, transit and charter buses, heavy trucks, fork and scissor lifts and off-highway construction equipment. Like the Xtreme Charge®, the X2 uses PulseTech's patented pulse technology which imposes high frequency pulsing cycles into batteries that work to break up and reduce both the number and size of sulfation deposits on battery plates. The result is 12V batteries with increased ability to accept, store and release energy, extending battery life. The quick-disconnect feature allows lugs to be permanently attach to the battery and easily switched between lugs and clamps. The status light column indicates when the unit power is on, pulsing and charging. The battery light column indicates the percentage of the battery's state of charge — 25%, 50%, 75% or 100%. Five-year limited warranty. What's Included: (1) Xtreme Charge Dual 12V Maintenance Charger, X2 (2) 2' Eyelet lug adapter cables, XC-LUGS (2) 2' Battery Leads with clips, XC-CLIPS 100X200 X2 Xtreme Charge Dual-Station Charger Xtreme Charge® Accessories "Leave-On" Eyelet Lugs Designed to be permanently installed on your vehicle or equipment battery. 7.5-amp, fuse-protected, 2 feet long. Utilizes standard quick-disconnect connectors. 100X830 XC-LUGS Leads with Clips Clip directly to battery terminals for charging. 7.5-amp, fuse-protected, 2 feet long. Utilizes standard quickdisconnect connectors. 100X827 XC-CLIPS www.xtremecharge.com Lead Extensions Ideal for garages or places where equipment is located far away from outlets. Utilizes standard quick-disconnect terminals on both ends. 100X805 XC-EXT-5 100X825 XC-EXT-25 QuickMount Bracket Full-Enclosure Bracket Open design allows you to unclip your Xtreme Charge® and take it with you. Ideal for shop use. Charger not included; not for use with X2. Heavy-duty, semi-permanent wall mount design for commercial use on trailers and generators. Charger not included; Not for use with X2. 100X808 XC-QM 100X810 XC-BKT 5