Issue link: https://read.dmtmag.com/i/1543215
6 www.pulsetech.com 800-580-7554 BATTERY CHARGERS 6 The Pallet Charger is a 12-volt, 6 amps per channel, 12-station charging unit that uses universal electrical input. Any type of 12-volt lead-acid bat- tery can be charged, including flooded cell, sealed, VRLA and AGM, regard- less of battery brand or capacity. Each of the 12 charge stations operate in isolation from one another, allowing any combination of battery brands to be recharged at the same time. If you service lots of batteries, this fully automatic rolling smart char- ger makes charging and pulsing your batteries simple and easy. With one switch control and progressive, easy-to-understand LED information display, operator training requirements are minimized. There's no need to move the batteries, simply roll the Pallet Charger to wherever the batteries are. Then connect the replaceable 8' 14-gauge flex- ible battery leads with clips and walk away. The HD Pallet Charger senses the condition of each individual battery and provides the appropriate charge without the risk of overheating or overcharging the battery. Once fully charged, batteries are float charged and pulsed with our pat- ented Pulse Technology to remove and prevent the buildup of large, dam- aging lead sulfate deposits on the battery plates – the main cause of battery failures. By reducing the size and number of lead sulfate deposits on the battery plates that negatively affect the battery's ability to accept, store and release energy, batteries charge deeper, maintain greater reserve capac- ity and last up to three times longer. Unit is repairable at the unit/shop level. The easy-to-install Drop-in Pallet Charger Replacement Insert upgrades your old Pallet Charger (2008 models or newer), bringing it up to the latest standards with PulseTech's advanced high frequency pulse charging algorithms. At about half the price of a new unit, it is fiscally and environmentally responsible. HD PC-12 NSN 6130-01-532-7711 12-Station Heavy Duty 12V Battery Pallet Charger (746X820) Drop-in Pallet Charger Replacement Insert NSN 5998-01-691-0141 (746X805) Specifications Input Electrical: Input Voltage: 110-250 V ac Input Current: 15 - 7.5 Amps Output Electrical: Max. Charging: 14.8 V at 6 A per channel Indicators: Battery Disconnected: Red LED Red LED Bad Battery: Red LED Red LED Recovery Charge: Yellow LED Yellow LED Pulse/Charge: Yellow LED Yellow LED Charge Complete: Green LED Green LED Mechanical/Physical Characteristics: Enclosure Dimensions: 17.5" x 28.0" x 14.0" Enclosure Type: Sand steel enclosure Leads: 8' 14 AWG Connector Cable Length: 10' Weight: 98 lbs. (w/leads) Pallet Charger Replacement Parts DESCRIPTION PART # NSN Drop-in Replacement Insert for Pallet Charger 740X805 5998-01-691-0141 Charger 8-Amp PC-Board 740X373 5998-01-645-7646* 8' Charging Cable with Clips 740X375 6150-01-618-5359* Chassis Connector, B-Type 740X458 5935-01-645-8488* Power Cord - 14/3 SJTOW, 6'3" 740X415 6150-01-618-0289* *These parts are compatible with the Pallet, Pro-PC-12 and Pro-PC-6 Chargers.