Issue link: https://read.dmtmag.com/i/1543215
800-580-7554 www.pulsetech.com BATTERY CHARGERS VS BATTERY SHOP CHARGERS 7 Both the 12- and 6-Station Portable Battery Chargers use universal electrical input and operate anywhere in the world. Any type of 12-volt lead-acid battery can be charged including flooded cell, sealed, VRLA and AGM regardless of battery brand or capacity. Each of the charge stations operate safely in isolation from the others, allowing any type and size of 12-volt battery to be evaluated and recharged at the same time. These Portable Battery Chargers are based on the same proven performance as the original full-size roll around Pallet Charger (HD PC-12, see opposite page), but with some significant differences. These chargers are compact in size, lighter and are equipped with multiple charging fans for better airflow and ventilation, allowing these chargers to be placed in a variety of locations. During the charge cycle the batteries are pulsed with our patented, high frequen- cy Pulse Technology to remove and prevent the build-up of large, damaging lead sul- fate deposits on the battery plates. This means batteries accept, store and release maximum power when needed, and battery life is extended by up to three times. After the batteries are fully charged, the chargers monitor the batteries and remain in peak condition indefinitely until ready for use. Each of the 12 charge stations has five LED indicator lights indicating the status of each battery. Smart Technology allows one-switch operation and minimizes training requirements. Both units are repairable at unit/shop level. • Recover and charge multiple batteries • Works on all 12-volt flooded cell, AGM, VRLA and gel lead- acid batteries • Evaluate and charge each bat- tery individually • Read battery condition and au- tomatically provide the correct charge • Extend battery life with patent- ed Pulse Technology • Compact size and multiple charging fans allow multiple placement options • One-switch operation means minimal training is required PRO-PC-12 NSN 6130-01-670-6428 & PRO-PC-6 NSN 6130-01-670-6729 12-Station (746X871) & 6-Station (746X860) 12V Portable Battery Chargers Specifications Input Electrical: Input Voltage: 100-250 V ac Input Current: 15 amps max Input Frequency: 50-60 Hz Minimum Battery Voltage for Charger Startup: 4 volts Output Electrical: Maximum Charging: 6 amps per channel Mechanical/Physical Characteristics: Enclosure Dimensions: 11.65" x 15" x 16.75" (PRO-PC-12) 5.25" X 15" X 16.75" (PRO-PC-6) 47 lbs (PRO-PC-12) 22 lbs (PRO-PC-6) Enclosure Type: Sand Steel Enclosure Leads: 8' - 14 AWG