Issue link: https://read.dmtmag.com/i/1543215
800-580-7554 www.pulsetech.com BATTERY CHARGERS 9 • Uses 110-volt or 220-volt ac power for worldwide use • Batteries cannot be overheated or overcharged • LEDs indicate 25%, 50%, 75% and 100% charge state The Pulse Charger World Version Plus recovers batteries previously thought bad. This voltage regulated, microprocessor controlled unit provides all the charge a battery will accept by monitoring the 12-volt battery and adjusting the charging current accordingly. It emits a series of dc current high frequency pulse shaped waves to reduce sulfation buildup. Sulfate deposits reduce a battery's ability to accept and keep a charge. Our pat- ented Pulse Technology breaks down the deposits, improving battery performance and extending the battery life of gel cell and sealed "maintenance-free" batteries. Use it to return unreliable batteries to active service. It's perfect for every facility that services combat and tactical vehicles and equipment. Colored LEDs make it easy to un- derstand with minimum training. Unit comes in a portable, heavy duty case. WC2200 NSN 6130-01-477-4703 / USMC NSN 6130-01-618-4572 12-Volt Pulse Charger World Version Plus (746X725) • Works with 24-volt lead-acid VRLA, AGM and flooded batteries • Uses 110-volt or 220-volt ac power for worldwide use • Green mode auto shut off when batteries are connected The Two-Station Pulse Charger allows you to charge and maintain two 24-volt lead-acid batteries at a time reducing battery-related equipment down time, maintenance and cost. It uses 110-volt or 220-volt ac power, comes in a portable heavy case and can be used anywhere in the world. This voltage regulated microprocessor controlled charger provides the charge need- ed to return 24-volt batteries or operating systems to the optimum level. When reached, it switches to float mode, so the battery doesn't overcharge or overheat. Throughout the process, sulfation buildup is reduced, im- proving performance and extending battery life. Colored LEDs make it easy to use with minimum training. Green Mode feature reduces input power consumption to less than one watt when ac power is applied and no batteries are con- nected. When a battery is connected the unit will immediately wake up. Green mode oper- ates independently for both charger outputs. 24V Dual NSN 6130-01-609-9818 Two-Station Pulse Charger ® (746X840) DLA Inventory Stock Item: NSN 6130-01-477-4703 The SC-2 2-Station 10-Amp HD Charger recovers, charges, maintains and desul- fates two 12-volt lead-acid batteries (VRLA, AGM, gel and flooded cell) at a time. There's no need to buy new batteries when you can recover old ones previously thought 'dead'. Each of the two stations operate in isolation from one another, al- lowing each battery to be recovered, charged and desulfated independently. The SC-2 is compact and portable allowing you to recover batteries on a pallet, in a shop or wherever they're being stored. The flexible, replaceable cables fit in the case for compact storage and are easy to disconnect and safely move to the next battery since no current flows through the cable until connected to the battery. It employs patented Pulse Technology that emits optimized frequency pulses throughout the charging process. SC-2 2-Battery 10-Amp Charger NSN 6130-01-689-4211 (746X814) Output Current: 16 amps maximum Input Current: 100 V ac to 250 V ac; 3 amps Max @ 100 V ac Dimensions: 14.2" x 11.5" x 6.5" Weight: 11.1 lbs. Battery Cord Length: 6' Battery Clamp Cable Length: 6' Output Current: 3.5 A max per output Input Current: 100 V ac to 250 V ac 2.33 amps max (@ 100 V ac in and I-out = 3.5 amps x 2 Dimensions: 14.2" x 11.5" x 6.5" Weight: 10.1 lbs. Battery Cord Length: 6' Clamp Cable Length: 6' Input Voltage: 120 VAC 50/60Hz Min. Voltage for Startup: 1 volt Output Current: 10A per channel Output Voltage, Max: 14.8V Dimensions: 15" x 9.17" x 3.38" Weight: 5.5 lbs. Output Cable: 1.8m 14 AWG SC-2 Replacement Parts NSN Charging Cable – 8' with clamps 6150-01-618-5359 AC Power Cord - 20A, 6'3" 6150-01-618-0289