www.fueloilnews.com | FUEL OIL NEWS | FEBRUARY 2014 43
Crown Boiler Company
Freeport 2
The Freeport 2 is a 3-pass, cast iron, oil fired
boiler from Crown Boiler. It is available in
both water and steam applications, and both
are Energy Star qualified.
Crown Boiler Company | Philadelphia,
PA | CrownBoiler.com
energy KinetiCs aCCel Cs
The Accel CS™
Combination heat
and hot water
system is whisper
quiet, features
energy recovery
(our thermal purge
control), and inte-
grates our domestic
hot water storage
tank with a plate
heat exchanger that
condenses during the full hot water cycle.
The "flat efficiency curve" delivers nearly
the same efficiency from small load through
full load operation, virtually eliminating
boiler oversizing effects. The 5-Zone Energy
Manager features SmartBoost™ which
dynamically adapts outdoor reset to recover
from night setback, improving home comfort
and reducing call backs from reset curves.
With a five-gallon water capacity, Accel
CS responds quickly to calls for heat and
smooth's out frequent cycling found in micro
mass condensing boilers.
Energy Kinetics |
Lebanon, NJ |
www.energykinetics.com
inner-tite thermal Cut-oFFs
INNER-TITE Thermal Cut-offs are designed
to disconnect power to heating systems
when room temperature exceeds 165˚F.
When heating system shuts off, flow of
fuel oil or gas is discontinued, eliminating
the possibility of heater damage, a fire or
acceleration of an existing fire. Inner-
Tite Thermal Cut-offs are: easy to install;
available with 165˚F or 200 F˚ fuse; for
residential or commercial use; can be Wired
into Audible Alarms; listed by Underwriters
Laboratories and made in the USA.
INNER-TITE | www.inner-tite-omco.com
intellidyne's
lCh
eConomizer
Intellidyne's LCH
Energy Economizer
is a micropro-
cessor-based,
fuel-saving control
designed for light-commercial hot-water
heating systems rated up to 2.5 million
BTU/hour. The LCH uses Dynamic Cycle
Management (DCM) technology to reduce
Boiler produCts
By niCholas upton