The home heating oil industry has a long and proud history, and Fuel Oil News has been there supporting it since 1935. It is an industry that has faced many challenges during that time. In its 77th year, Fuel Oil News is doing more than just holding
Issue link: https://read.dmtmag.com/i/409852
46 November 2014 | FUeL oIL NeWS | www.fueloilnews.comm BWG Fuel Oil Tank HeaTer Designed for all outdoor fuel oil storage tanks, including biofuels. The heated draw tube keeps oil warm where you need it. Can be installed in any available 2-inch tank fitting, automatic shut-off valve included. Heater turns on at 40°F, this starts a convection current and heats the product. BWG Specialized productS | 508.987.1065 bwgspeedyjoe@charter.net inner-TiTe FusiBle Oil ValVes Inner-Tite Fusible Oil Valves are engineered to stop the flow of fuel in the event that the room temperature exceeds 165°F. Inner-Tite Fusible Oil Valves are UL Listed and meet NFPA Standard 31. Inner-Tite manufactures a complete line of fusible oil valves, fusible angle valves, check valves, tanks valves and a variety of acces- sories engineered for use at residential oil burner installations. These high performance valves feature strong steel bodies and posi- tive release valves. All Inner-Tite valves are manufactured from premium raw materials guaranteeing consistent performance for many years. Inner-Tite Fusible Oil Valves are sold to approved plumbing and heating distributors inner-tite | www.inner-tite-omco.com sOlVe inTermiTTenT Burner PrOBlems The Onwatch Model 51is user- friendly and can improve your bottom line. Solve your worst service nightmares with this new technology. Solve problems others cannot solve, no special training for the installation. Models 41 & 51 are repaired & recalibrated by Samco Electronics. Samco | www.onwatchinc.com THe BeckeTT Genisys ® adVanced Burner cOnTrOl & Genisys ® cOnTracTOr TOOl The Beckett GeniSys ® Advanced Burner Control is a 120 Vac primary safety control for residential and light commercial oil burners used in boiler, furnace and water heater applications having firing rates less than 20 GPH. The GeniSys ® is used with a suit- able cad cell flame sensor to control the oil burner motor, igniter, and optional solenoid valve. It has 24 Vac thermostat terminals (if applicable) compatible with both mechanical and many power stealing thermostats. It can also provide interrupted or intermittent duty ignition. The Beckett GeniSys ® Contractor Tool is a rugged hand-held tool for use by service engineers. The screen shows current burner status, control timings, and burner cycle history. The contractor tool programming mode allows a technician to customize both the pre-time and post-time settings on the job site making the GeniSys ® truly a universal control. rW Beckett | www.beckettcorp.com 3/k-2 FlOW-cOnTrOl Oil de-aeraTOr Mitco Manufacturing offers the newly rede- signed 3/K-2 Flow-Control oil de-aerator. In addition to de-aeration, the device also helps warm oil for more consistent viscosity and burner performance and features a second chamber with a third float for better perfor- mance in high vacuum installations. It is TUV tested and rated for use with 100% biodiesel and ambient temperature up to 140°F. The Flow-Control 3/K-2 carries a 5 year warranty and has a 20 year life expectancy. mitco manufacturing | www.mitcomfg.com nOzzle Guard nG GWs FilTer WaTer seParaTOr The Nozzle Guard NG GWS filter water separator is designed to be used as a primary filter for mounting indoors in a heated space as close to the fuel oil tank as practical. The GWS utilizes three stages of impinge- ment and gravity separation to remove water droplets and solid contaminants such as rust particles, sand and scale from the fuel oil. NG GWS has all of the features of NG 3500. Fine solid contaminant which may pass through the GWS is removed by the secondary filter (e.g., NozzleGuard NG 3500), which must be installed after the GWS, and as close to the burner as practical. industrial & aviation Filters | www.nozzleguard.com Burners & accessOries rOunduP